List Number of Client AP Handles on Each Radio

[fdharmawan]

Hi Guys,

Currently I am doing a wireless review. Some of the aspects being reviewed are AP tx power and clients connected to the AP on each radio. I am able to get the tx power on each radio by issuing "show advanced 802.11a/b txpower" command. But I could not get the CLI command or GUI menu where I can find the client connected for each radio. The closest that I can find is all the clients that are connected to the AP, but it is the sum of slot 0 and 1 radios (Advanced -> Wireless -> Access Points -> All APs). Is there a CLI command or GUI menu where I can find the clients that are connected to each radio of AP? I am running 5520 on 8.10.162.0. Thank you.

[marce1000 · Accepted solution]

 - FYI : https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chapter_01111010.pdf

 M.

[fdharmawan]

Hi Marce,

I finally using the "show client summary" then tweak the output on Excel to get what I want. Thank you for the insight. Maybe Cisco does not provide it.