Local Web Authentication with Cisco ISE

[jain.manish94]

Hello Team, 

I have two WLC 4400 Series using 7.x.x.x code. 

I want to configure Local Web Authentication with ISE (for Sponsor Portal)

can any one suggest what configuration should be on both WLC 4400 (one is on site and one is Anchor WLC) mean to say foreign and Anchor setup ? for Local Web Authentication

what policy and configuration required on ISE ?

Please i have to setup this because i am not able to setup Central Web authentication because of legacy devices (WLC 4400 with 7.x code)

Thanks

Manish Jain 

[balaji.bandi]

7 Code is too old,  been Long time worked, not remember on top of my head steps :

check below some guidance steps :

https://mrncciew.com/2013/03/21/wlc-web-authentication/

Some reference :

https://community.cisco.com/t5/security-documents/ise-guest-access-prescriptive-deployment-guide/ta-p/3640475

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html

[jain.manish94]

i have already this. but does not help. 

I want if someone can share his/her experience. 

[ammahend]

Read this post for some experience deploying similar solution 

https://community.cisco.com/t5/network-access-control/local-webauth-with-wireless-lan-controller-and-ise/td-p/2691804