03-08-2022 06:27 AM
Hi Guys,
i have tried using TFTP to upload the firmware.
managed to upload the firmware.
after rebooting the controller, the controller is not using the new firmware.
the backup image just becomes 0.0.0.0 ???
checking on the log make me wonder, do i need to change the country code???
%LWAPP-3-STATIC_IP_ERR: spam_lrad.c:55633 Configured static IP Address is not valid for AP 6c:31:0e:91:70:00
*spamApTask0: Mar 08 21:51:00.762: %CAPWAP-3-MDNS_INIT_NOT_DONE: capwap_ac_sm.c:8431 mDNS module is not initialized yet, but a mDNS AP : 6c:31:0e:b1:08:20 has joined.Aggregated query is not sent until mDNS init.
*spamApTask0: Mar 08 21:51:00.759: %CAPWAP-3-AP_AUTOCONVERT_ERR: capwap_ac_sm.c:3710 The system is unable to autoconvert AP 6c:31:0e:b1:08:20 to supported mode.
*spamApTask0: Mar 08 21:51:00.746: %LWAPP-3-RD_ERR6: spam_lrad.c:12094 APs (6c:31:0e:b1:08:20) regulatory domain (-E) is not supported in country (SG ), slot 80211a (1) supports -S
*spamApTask0: Mar 08 21:51:00.746: %LWAPP-3-RD_ERR6: spam_lrad.c:12041 APs (6c:31:0e:b1:08:20) regulatory domain (-E) is not supported in country (SG ), slot 80211xor (0) supports -S
*spamApTask0: Mar 08 21:50:58.764: %LWAPP-3-RD_ERR6: spam_lrad.c:12094 APs (6c:31:0e:b1:08:20) regulatory domain (-E) is not supported in country (SG ), slot 80211a (1) supports -S
*spamApTask0: Mar 08 21:50:58.764: %LWAPP-3-RD_ERR6: spam_lrad.c:12041 APs (6c:31:0e:b1:08:20) regulatory domain (-E) is not supported in country (SG ), slot 80211xor (0) supports -S
Need help.
Solved! Go to Solution.
03-08-2022 07:10 AM
You should add more information to your post. What controller, what access points, what code and what new image have you tried. If the controller reboots without the new image, then it's either a corrupt image or the image you want to go with requires another intermediate image.
03-08-2022 07:10 AM
You should add more information to your post. What controller, what access points, what code and what new image have you tried. If the controller reboots without the new image, then it's either a corrupt image or the image you want to go with requires another intermediate image.
03-08-2022 07:13 AM
03-08-2022 07:23 AM
I would have to say that you are not upgrading the mobility express controller properly. My suggestion is to search around and look at some blogs or videos on this topic. That will help you get the image to the ap and be able to upgrade. There are so many docs out there on this.
03-08-2022 07:37 AM
Take a look at this video: Cisco Mobility Express Upgrade - YouTube
03-08-2022 09:08 AM
@Scott Fella its the same step as what i did
I did another try upgrading to 8.5.182 first, it succeed!!!!!
lastly upgrade to 8.10 151, it work like magic.
03-08-2022 09:27 AM
There you go... maybe you can't jump that high, but the release notes should mention that.
03-08-2022 01:55 PM
@owen2 wrote:
regulatory domain (-E) is not supported in country (SG ), slot 80211a (1) supports -S
I'm just sayin'.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide