04-14-2014 02:16 AM - edited 07-05-2021 12:40 AM
Hi experts,
I want to Migrate WLC 4400 with WLC 5500, But i don't know how to do this.
Should i create new configuration or use my WLC 4400 config ?
I want to know about IOS for WLC 5500, should I upgrade my Access Point to connect with new WLC ?
I need a good method to migrate this WLC. So my WLC 5500 can run properly.
Thankyou for your help.
Solved! Go to Solution.
04-14-2014 12:39 PM
If your current access point code is not supported then you have to upgrade the access point. To check this you can see the compatibility list of WLC 5500. here is link for the same
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
04-14-2014 04:01 AM
You can Copy paste the configurations
04-14-2014 07:14 PM
are they same type of configuration file? there is no error when I copy the configuration??
04-14-2014 08:09 PM
I have no idea how Ravi's answer is considered "correct" when he didn't address the most important aspect of your thread.
As far as I'm aware, you need to ensure both controllers are running the same firmware or 7.0.250.X.
Take a copy or export the config of the 4400 configuration to your TFTP server. Edit the file and change the necessary settings. Go to the 5500 and download this configuration file. Upgrade the firmware and the bootstrap if necessary.
04-14-2014 12:39 PM
If your current access point code is not supported then you have to upgrade the access point. To check this you can see the compatibility list of WLC 5500. here is link for the same
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
04-14-2014 01:19 PM
I don't want to recreate the wheel here... there are many post regarding this. Just search for:
It's easy if you understand the commands, or else it may be easier for you just to configure the new 5508 from scratch. Less chance of messing it up.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide