cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1046
Views
0
Helpful
6
Replies
Highlighted
Beginner

Multiple VLAN's, one SSID

I'm getting to the point where my campus wireless network is growing past the subnet size that I'm comfortable dealing with.  I have a WiSM and WCS and am running the newest IOS on each.  Is there any way to use multiple VLAN's on one campus-wide SSID?

Or, can I put the same SSID on the two controllers and map it to two separate VLAN's without causing roaming issues?

Thanks,

Eric

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Hi Eric,

Yes we can do this and this feature is called AP Grouping on WLC... Here is the configuration example to do the same..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

Regards

Surendra

Regards
Surendra BG

View solution in original post

6 REPLIES 6
Highlighted
Cisco Employee

Hi Eric,

Yes we can do this and this feature is called AP Grouping on WLC... Here is the configuration example to do the same..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

Regards

Surendra

Regards
Surendra BG

View solution in original post

Highlighted
Hall of Fame Community Legend

Hey Surendra,

How about "Interface Groups"?

Highlighted

ha ha Only few ppl are running the MR image as of now!!

Regards

Surendra

Regards
Surendra BG
Highlighted
Hall of Fame Community Legend

Good feature, though! 

Highlighted

Thanks!  That did it.  I wish there was a way to just pool controller-wide instead of per AP, but that fixed my problem and allowed me to do some other neat things as a result.

--Eric

Highlighted

Thats nice to hear!! Thanks for posting on CSC!!

have a great day

Regards

Surendra

Regards
Surendra BG