02-15-2011 12:36 PM - edited 07-03-2021 07:49 PM
I'm getting to the point where my campus wireless network is growing past the subnet size that I'm comfortable dealing with. I have a WiSM and WCS and am running the newest IOS on each. Is there any way to use multiple VLAN's on one campus-wide SSID?
Or, can I put the same SSID on the two controllers and map it to two separate VLAN's without causing roaming issues?
Thanks,
Eric
Solved! Go to Solution.
02-15-2011 05:45 PM
Hi Eric,
Yes we can do this and this feature is called AP Grouping on WLC... Here is the configuration example to do the same..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
Regards
Surendra
02-15-2011 05:45 PM
Hi Eric,
Yes we can do this and this feature is called AP Grouping on WLC... Here is the configuration example to do the same..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
Regards
Surendra
02-15-2011 05:49 PM
Hey Surendra,
How about "Interface Groups"?
02-15-2011 06:04 PM
ha ha Only few ppl are running the MR image as of now!!
Regards
Surendra
02-15-2011 06:09 PM
Good feature, though!
02-17-2011 07:52 AM
Thanks! That did it. I wish there was a way to just pool controller-wide instead of per AP, but that fixed my problem and allowed me to do some other neat things as a result.
--Eric
02-17-2011 09:32 AM
Thats nice to hear!! Thanks for posting on CSC!!
have a great day
Regards
Surendra
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide