cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1144
Views
0
Helpful
3
Replies

Nearby APs in running configuration

Hi 

 

I have seen the Nearby APs detail in Cisco WLC show run-config 

 

Nearby APs
AP 5c:50:15:25:6b:3f slot 1.................. -95 dBm on 157 40MHz (X.X.X.X) AP-TEST-1

 

What this line showing? within brackets the IP address mentioned.

3 Replies 3

Sandeep Choudhary
VIP Alumni
VIP Alumni

 

showing the nearby AP for a clinet:

 

AP 5c:50:15:25:6b:3f slot 1.................. -95 dBm on 157 40MHz (X.X.X.X) AP-TEST-1

 

5c:50:15:25:6b:3f - MAc address of AP

Slot1: 5 Ghz Band

-95 dBm - RSSI

157 - Channel Number

40MHz - Channel Width

X.X.X.X - IP of AP

AP-TEST-1 - AP Name.

 

Regards

Dont forget to rate helpful posts

Hi Sandeep

Thanks for the reply but some terms are not correct.

x.x.x.x is not showing IP address of AP. It is showing IP address of WLC.
and MAC address is neither ethernet MAC address of AP nor MAC address of Radio bands.

The last two hex of the mac address change, based on the ssid in some cases. Not sure if that is true here, but keep that in mind.
Review Cisco Networking for a $25 gift card