12-10-2002 12:08 PM - edited 07-04-2021 08:24 AM
I have two 350s, point to point with Yagis. ~1000 feet. Signal quality is 97-100%
Every 15 minutes or so the link dies and it re-associates. (error states-lost authentication with Parent ) When I disable WEP everything works fine. Are there any known bugs and is there a workaround other than disabling WEP?
12-10-2002 08:44 PM
WEP key timeout that will force reauthentication.. That shouldn't effect any users or data rates transfer..
So if you need you can play with that wep key timeout.
12-11-2002 11:28 AM
Problem started again. Even now with no WEP enabled. Possible bad hardware? Anything else I can try?
12-12-2002 10:24 AM
First of all you need to determine do you see the users get de-associated and re-associated..and is there any connectivity loss..
I would say start with just simple ssid config to get association..After that verify that you can stay connected long enough..After that start configuring WEP again..
Also i don't think you have any hardware problem.
12-12-2002 12:04 PM
I do see the bridges lose connectivity. I have now tweaked every setting I could, and still they randomly disconnect.
Thank you for your help. I have opened a case with TAC.
12-12-2002 02:40 PM
I have had similar occurence. Double check what role the radio plays in that connection. Root / Repeater with no clients / Repeater with clients, if you have an incorrect match the units will periodically lose authentication and then re-associate. Look under >setup>network ports>bridge radio> advanced. Just something to double check.
12-13-2002 07:21 AM
One end is configured as Root Bridge and one end is configured as Non-Root w/o clients.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide