oeap deployment step of 9100

[ahmad.syed]

Hi team,

Can you please suggest steps for deploying 9100 series ap as an oeap on controller 9800 wlc

[Rasika Nayanajith · Accepted solution]

Here is the OEAP deployment guide with 9800. There is nothing special about 9100 series AP with respect to it.

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215681-configure-oeap-and-rlan-on-catalyst-9800.html 

HTH
Rasika
*** Pls rate all useful responses ***

[ahmad.syed]

Hi @Rasika Nayanajith ,

Thanks for help . I am using DNAC . Need document related to steps used for provisioning OEAP on same WLC where we have normal AP i.e. NON-OEAP. 

[murray.bown]

@Rasika Nayanajith 

Thank you for posting the link to the configuration guide. I have an addition question that i have not been able to find the answer to so far. In the guide you posted it shows the WLC being NATted to a controller on the inside of the firewall, I have seen deployments where there is a controller in the DMZ, I believe this would be referred to as a Mobility anchor, that would then pass traffic to a controller on the inside LAN, do you have any documents or links to this configuration?

Thank you.