Parameter Aironet AP1242 Access Point

stevechenot · ‎11-03-2014

Hello, I have an Aironet AP1242 access point with which I have a problem. I can not accept the settings in the web interface. As soon as I click the "Apply" button it does not take into account the new settings. Do you have an idea to solve my problem?
Thank you by advance for your answers.
Steve

Rasika Nayanajith · ‎11-03-2014

Is it possible to attach the "show run" configuration of the AP while accessing it CLI.

For autonomous AP cli config is always reliable.

HTH

Rasika

sorvarit · ‎11-03-2014

We have this problem too with newer IOS versions. You cannot trust the input/output given when using the GUI. Anything newer than 12.4-21a.JA1 or JA2 doesnt work well for us with newer browsers, so we do our GUI tasks on an old Windows 2003 server with IE8...

stevechenot · ‎11-03-2014

Thank you for your reply, I will try with an older browser and would keep you informed if you can reach.

stevechenot · ‎11-05-2014

Hello, the problem is with the browser. I use the development tools to emulate Internet Explorer 9 version 7 and I can change the settings. Everything works perfectly. Thank you again for your help.