Hey Community! I'm excited to share something we've been working on that I think will really resonate with many of you managing wireless networks today. We just released the Cisco State of Wireless Report 2026, based on insights from over 6,000 wirel...
Forum Posts
A customer has asked if, rather than using Meraki System Manager to handle wireless client authentication, he can use MS Intune. I have no experience with Intune: from what I'm seeing on the Internet, it might be possible, but I can't be sure. I was ...
Resolved! ENWLSI 300-430 Pre requisities
Hi Guys,Could someone clarify me whether I can directly write the CCNP ENWLSI 300-430 Exam directly since i dont have any valid CCNA or any other Cisco certifications at the moment.So please clarify the same.
Currently trying to setup a wireless network on the other side of the planet, we're experiencing Radius server timeouts on client authentication, latency is around 133-137ms back to the Radius server. Tried increasing the radius server timemout from ...
We have a C9800-40 running version 17.9.3 I’m looking to see if there are AP Statistics like the old WLC 5508 had.With the 5508 there were AP Usage and Throughput statistics.I am not finding that with the 9800. Are those statistics available on the 9...
helloi'm facing a problem with the RM 57 this error message occurs Five ghz valid auto channels please select a 5-lo channelFive ghz valid auto channels please select a 5-hi channelhow to fix this problem
Resolved! Wi-Fi planning with MX68W
I'm making Wi-Fi planning to office floor-map. In the tool I'm using there are no Meraki MX devices configured, but all MR models are there. Does someone know which MR model would be closest to MX68W when comparing Wi-Fi 2 and 5 GHz coverage?
I am firstly setting up C9800 , but AP join is not working and stays in "ap auth pending".DTLS session is established by checking "Monitoring -> Wireless AP statistics -> Join statistics".I tried adding AP mac address in "Tags-> AP -> Static" , but i...
Hello Team, I hope all is well. I need to add the MR78 to my Network. I cannot do it on the dashboard: https://n508.meraki.com/ezaiello_wireles/n/5J2Clcewb/manage/usage/list and on my list of devices, I have MX68 & MR44 https://devices.cisco.com/se...
How to join an AP to a controller 2504
I have 2 MR70 access points as a bridge to another building. (Office side and remote side) Inside the remote building i have the bridge MR70 plugged into a MS-120 switch (which is providing the PoE to the MR70). I also have an inside access point MR...
hello community i'm facing a problem through the configuration of SSID of the MR 57 i create an account meraki then i create a network and attach the device to it mooving on , i configure an SSID for the MR57 but the ssid does not appear in the wifi ...
Any ideas what's happening here?We have a MacOS computer that refuses to connect to the RADIUS (email and PW credentials) via an AP (1 of 4). EAPoL timeout error.
Hello Everyone,Want to configure MAC Address base auth in the SSID/access point is it possible? if yes please help me with the same.
In the configuration:WLC to switch: switchport configuration has native vlan and trunk.AP to switch: switchport configuration has access vlan, no trunkCan someone explain to me why switchport configuration of the AP has no trunk?How does the WLC and ...
HelloWe encountered an unusual problem with our Cisco Aironet 1600 access point device.Our goal is to enable authorizations using mac-filtering.When entering the Access point in Security -> Advanced Security there is a 'Local MAC Address List' which ...
