10-05-2013 11:40 AM - edited 07-04-2021 01:01 AM
I would like to purchase the physical appliance the serves both LMS/NCS. Is this possible on the NCS appliance running 1.3 or is this only available on a 2.0 appliance. If so any documentation supporting this would be appreciated..
Sent from Cisco Technical Support iPad App
10-05-2013 06:59 PM
CPI 2.X is available in VM & appliance.
According to our SE, Cisco has put PI 2.X (and any future PI releases) back on the table for appliance.
Sent from Cisco Technical Support Nintendo App
10-05-2013 09:57 PM
Do you know if LMS and NCS can coexsit on the same box on 1.3?
10-05-2013 11:32 PM
No it can't.
Sent from Cisco Technical Support iPhone App
10-06-2013 10:15 AM
Great, So PI 2.0 will not support this as well? Sorry to keep harping I just need some clarity, I have been reading conflicting posts on this.. I was under the impression that centralized management was the whole point behind PI.. Apparently not..
Sent from Cisco Technical Support iPad App
10-07-2013 07:23 AM
Do you mean on the same ESX based box as a virtual appliance? I guess that would be possible, if you meet the hardware requirements.
10-07-2013 07:27 AM
You can't run two systems on an appliance. An appliance allows only one OS to run at a given time. PI and LMS need to be ran on a separate VM'swhich can be on the same VM host, but are individual virtual machines.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
10-07-2013 09:36 PM
Thank you..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide