cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
939
Views
0
Helpful
4
Replies

Prime - No Adaptive wIPS Service enabled MSE selected

marcoadolfo
Level 1
Level 1

wer have a Prime 3.7, MSE 8.0, vWLC 8.5 and AP in Monitor Mode with SubMode wIPS enabled.

If I Run a Adaptive wIPS Alarm Report I receive the message :

No Adaptive wIPS Service enabled MSE selected.

 

I don't understand if the Adap wIPS is operational or only problems on the Report

 

4 Replies 4

patoberli
VIP Alumni
VIP Alumni

Is Prime also running the latest Service Packs and Patches?

I think it should be working with the devices you have, but haven't tested it (lacking a MSE). 

Hi patoberli
My Prime is at version 3.7.0.0.159 without any patches.
Tomorrow I will download patch PI 3.7 Update 03 and I will install it
I will update you

Thank you


Grendizer
Cisco Employee
Cisco Employee

Did you add the MSE to PI? Services > Mobility Services > Mobility Services Engines If so, what’s the status of the MSE from PI? Check PI 3.7 User Guide for those steps https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-7/user/guide/bk_CiscoPrimeInfrastructure_3_7_0_User_Guide.html

Check also the firewall between PI and MSE “if there is a firewall” following the doc here: https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113344-cuwn-ppm.htmlIf

if everything looks good, then just change the report criteria with a specific MSE instead of all MSEs.

everything looks good
I changed the report criteria with a specific MSE instead of all MSEs and now all work fine !!!

Thank you.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: