There is no concept of trusting QoS on WLC. Since WLC connected to switch, what matter most is how you configure QoS trusting on that switch port.
It is recommended to go with turst DSCP everywhere. More precisely AP connected switch ports and WLC connected switch ports. Wireless use original IP packet (not CAPWAP header) DSCP details to derive any other QoS values (set UP value in MAC header for downstream traffic AP->Client , set 802.1Q Priority when WLC send traffic to Wired site on a trunk link)
That 4 profiles (Platinum, Gold, Silver, Bronze) does not do anything other than set max DSCP values set in the outer CAPWAP header. Pls have a look this short video by Jerome Henry explains it well
Listen: https://smarturl.it/CCRS8E33 Follow us: https://twitter.com/ciscochampion The goal for stadium and large venue Wi-Fi is to deliver an exceptional, fast, and reliable wireless experiences to tens of thousands of fan...
We are pleased to announce the immediate availability of the IOS-XE release 17.6.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link:
This version now introduces experimental new feature, "Upgrade Advisor, targeted to one of common case generators: what are the supported versions and how to upgrade my current controllers and APs
It supports both AireOS and IOS-XE, covering since ...
Thank you for the overwhelming response to the First and Second EFT refresh of 8.10MR6!
We are excited to announce the third refresh of 8.10 MR6 EFT Program for PRODUCTION deployments.
While the CCO release of 8.10MR6 is just a few we...
Greetings!Thank you for the overwhelming response and feedback for the first 17.3.4 EFT/Beta release.
Now we are excited to announce the second refresh of 17.3.4 EFT/Beta Program for PRODUCTION deployments.
This release is the s...