Re: Query Regarding Cisco Prime Infrastructure Syslog server (qradar)

BhaskarDS · ‎06-26-2020

Hi,

I have a query regarding the syslog server of Prime.

Our end client is having IBM Qradar syslog server. And they have configured that in the Cisco Prime Infrastructure. However, no logs are being sent to the syslog server from the prime. It hasn't worked anytime.

Now I want to know if IBM qradar is compatible with Cisco Prime Infrastructure ? I am not getting any document where it shows what 3rd party syslog server is supported in prime.

Can anyone help me in this ?

Prime version: 3.3.1

marce1000 · ‎06-26-2020

- As far as the syslog-protocol is concerned, it should always be compatible, try another syslog server as a sanity check.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R · ‎06-29-2020

As @marce1000 says syslog is a standard so there should not be any question of compatibility.
It's much more likely to be a problem with the Prime configuration or possibly the syslog server configuration or maybe you have ACLs or firewall between the 2 servers blocking the syslog traffic (and presume the Prime server has a route to reach the syslog server)?

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390