10-02-2012 03:36 AM - edited 07-03-2021 10:45 PM
Hi,
Can someone please provide me with the steps to follow to reset the WLC credentials using WCS.
Best Regards,
10-02-2012 04:43 AM
Is there a reason you want to change the password from the WCS and not from the WLC? If you are locked out, here is a good link from George's blog
http://www.my80211.com/home/2009/12/27/recover-your-wlc-password.html
I tend to add another management user from the WLC or WCS and then you delete the old username and create it again with the new password.
Sent from Cisco Technical Support iPhone App
10-02-2012 05:51 AM
Hi Scott,
The reason why I would like to reset the password from WCS is that the password recovery did not work on the WLC. I went through all of the steps but after resetting the password I am still not able to log to the WLC.
Best Regards,
10-02-2012 06:11 AM
Are you able to add another management user from WCS? You can always push out a CLI template from WCS to the WLC.
Sent from Cisco Technical Support iPhone App
10-02-2012 06:14 AM
I am novice at WCS. I don't how to add a management user or to push a CLI template.
10-02-2012 06:19 AM
Follow the instructions in this release notes. If your version varies from this, just look up the release notes for the version you have. This should be close.
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0temp.html#wp1261256
Sent from Cisco Technical Support iPhone App
10-02-2012 06:16 AM
Here is the command for the CLI to create a new username
config mgmtuser add username password read-write
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide