01-28-2015 07:41 PM - edited 07-05-2021 02:21 AM
Guys,
Could you please explain briefly about RTS/CTS mechanism.
when an environment use RTS/CTS mechanism?
when CTS to self frames occurs?
How CSMA/CA mechanism involved in RTS /CTS mechanism?
Thanks,
Suresh
01-28-2015 07:48 PM
http://bit.ly/1A0cQCu
01-28-2015 07:54 PM
http://bit.ly/1A0cQCu
ROFL!
Steve, if the OP gets a "D" in his schoolwork, you're going into big trouble!
01-28-2015 08:58 PM
Thanks for the reply
01-28-2015 08:58 PM
Hi Stephen,
Thanks for the reply.
01-30-2015 03:10 PM
:)
02-12-2015 03:55 AM
Hi Stephen,
I have few doubts to clarify.
Can you please clarify the below questions.
Thanks in advance.
Thanks,
Suresh.
02-12-2015 06:34 AM
When the RTS doesn't reach the radio the client will not get a CTS and will retry the RTS frame again.
DCF doesn't support QoS and is considered equal access tocall. QoS is supported in HCF. EDCA work with HCF and QoS. It is the mechanism that supports cW sizes.
Depends on really on how long the client needs the medium for. If it send large frames @ 1500 bytes at 1 PHY, it will need more time of course.
Not sure, but they are small. These are control frames and have no payload.
RTS/CTS is used when the protection mechanism is used for example b clients on a g/n network. Its also used in the new 11ac as well.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide