cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4227
Views
0
Helpful
4
Replies

show Commands to check AP config

johnlloyd_13
Engager
Engager

hi all,

i configured a Cisco 1231 AP and would like to know what are the usual and helpful commands to know if it's working esp on the radio part. TIA!

#sh ver

Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Wed 23-Aug-06 16:42 by kellythw

ROM: Bootstrap program is C1200 boot loader

BOOTLDR: C1200 Boot Loader (C1200-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (fc1)

AP uptime is 21 hours, 52 minutes

System returned to ROM by power-on

System restarted at 06:09:14 UTC Tue Nov 12 2013

System image file is "flash:/c1200-k9w7-mx.123-8.JEA/c1200-k9w7-mx.123-8.JEA"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-AP1231G-A-K9     (PowerPC405GP) processor (revision A0) with 15138K/1236K bytes of memory.

Processor board ID FOC10514NQM

PowerPC405GP CPU at 196Mhz, revision number 0x0145

Last reset from power-on

1 FastEthernet interface

1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:1A:6C:17:A1:BE

Part Number                          : 73-8704-14

PCA Assembly Number                  : 800-23211-14

PCA Revision Number                  : A0

PCB Serial Number                    : FOC10514NQM

Top Assembly Part Number             : 800-29026-01

Top Assembly Serial Number           : FTX1104R05N

Top Revision Number                  : A0

1 Accepted Solution

Accepted Solutions

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

"sh dot11 ass" shows you what clients are associated and what their respective IP address is.

View solution in original post

4 Replies 4

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

"sh dot11 ass" shows you what clients are associated and what their respective IP address is.

thanks pre!

i'm fairly new to wireless as you can see.

will start from here and check out this command.

#show dot11 bssid

Interface      BSSID         Guest  SSID

Dot11Radio0   0019.e8af.1780  Yes  WIFI_INTERNET

Dot11Radio0   0019.e8af.1781  No   CREW

Dot11Radio0   0019.e8af.1782  No   WIRELESS

do you have quick list of the show commands you usually issue?

I normally use "show dot11 associations" & "show dot11 association " commands most of the time

HTH

Rasika

"sh dot11 ***" s

L1ntik!

It's "sh dot11 associate". 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: