11-12-2013 08:22 PM - edited 07-04-2021 01:15 AM
hi all,
i configured a Cisco 1231 AP and would like to know what are the usual and helpful commands to know if it's working esp on the radio part. TIA!
#sh ver
Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 23-Aug-06 16:42 by kellythw
ROM: Bootstrap program is C1200 boot loader
BOOTLDR: C1200 Boot Loader (C1200-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (fc1)
AP uptime is 21 hours, 52 minutes
System returned to ROM by power-on
System restarted at 06:09:14 UTC Tue Nov 12 2013
System image file is "flash:/c1200-k9w7-mx.123-8.JEA/c1200-k9w7-mx.123-8.JEA"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco AIR-AP1231G-A-K9 (PowerPC405GP) processor (revision A0) with 15138K/1236K bytes of memory.
Processor board ID FOC10514NQM
PowerPC405GP CPU at 196Mhz, revision number 0x0145
Last reset from power-on
1 FastEthernet interface
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1A:6C:17:A1:BE
Part Number : 73-8704-14
PCA Assembly Number : 800-23211-14
PCA Revision Number : A0
PCB Serial Number : FOC10514NQM
Top Assembly Part Number : 800-29026-01
Top Assembly Serial Number : FTX1104R05N
Top Revision Number : A0
Solved! Go to Solution.
11-12-2013 09:09 PM
"sh dot11 ass" shows you what clients are associated and what their respective IP address is.
11-12-2013 09:09 PM
"sh dot11 ass" shows you what clients are associated and what their respective IP address is.
11-12-2013 09:24 PM
thanks pre!
i'm fairly new to wireless as you can see.
will start from here and check out this command.
#show dot11 bssid
Interface BSSID Guest SSID
Dot11Radio0 0019.e8af.1780 Yes WIFI_INTERNET
Dot11Radio0 0019.e8af.1781 No CREW
Dot11Radio0 0019.e8af.1782 No WIRELESS
do you have quick list of the show commands you usually issue?
11-12-2013 10:16 PM
I normally use "show dot11 associations" & "show dot11 association
HTH
Rasika
11-12-2013 11:31 PM
"sh dot11 ***" s
L1ntik!
It's "sh dot11 associate".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide