SNMP OID for monitoring CPU on Aironet1252

[urvininocente]

Dear All,

I am trying to poll the 5 minute average CPU utilization of my Cisco Aironet 1252 (IOS version 12.4(25d)JA) using SNMP OID .1.3.6.1.4.1.9.2.1.58.0

Howvere for some reason I am not getting any response back from the aironet.

Note I am able to retrive the memory utilization without a problem.

Am I using the correct OID? In the event that I am what could be causing this problem.

Regards,

Urvin    

[David Watkins]

Looks like what you're doing "should" work

ftp://ftp.cisco.com/pub/mibs/supportlists/c1250/c1250-supportlist.html

You might try the CISCO-PROCESS-MIB

Object	cpmCPUTotal5minRev
OID	1.3.6.1.4.1.9.9.109.1.1.1.1.8

but not sure that's exactly what you're looking for.

You could run an SNMP debug on the AP and capture the query/response(or lack their of) and see what the AP has to say.