snmp oid to list dot11 associations

[ippolito]

Hi,

We successfully use this oid on our Aironet 1240 series AP's to list the dot11 associations to the AP:

1.3.6.1.4.1.9.9.273.1.2.1.1.18 (cDot11ClientSubIfIndex).

However, that oid does not work on our Aironet 1140 series AP's.  Can anyone tell me the equivalent oid?

thanks in advance,

Mike

[Jerry Heath]

I, also, have need for the OID to get associations on a Cisco 1142N Autonomous AP.  Did you ever find a solution?

[ippolito]

unfortunately not

[Saurav Lodh]

check if this works

"ciscoAIRAP1141"          "1.3.6.1.4.1.9.1.1034"
"ciscoAIRAP1142"          "1.3.6.1.4.1.9.1.1035"

[cessauce58292]

It doesn't appear 1.3.6.1.4.1.9.1.1035 worked my 1142.  Any other suggestions?  I've been searching for an

oid that would return a list of clients associated to a 1142 AP (with the clietns mac address). 

[DIANNE DUNLAP]

snmpwalk -c <community> -v2c <ip>  1.3.6.1.2.1.4.22.1

returns the table like:

snmpwalk -c Cisco -v2c 10.1.1.101 1.3.6.1.2.1.4.22.1
IP-MIB::ipNetToMediaIfIndex.5.10.1.1.1 = INTEGER: 5
IP-MIB::ipNetToMediaIfIndex.5.10.1.1.101 = INTEGER: 5
IP-MIB::ipNetToMediaIfIndex.5.10.1.1.107 = INTEGER: 5
IP-MIB::ipNetToMediaPhysAddress.5.10.1.1.1 = STRING: 0:1e:4a:c7:50:41
IP-MIB::ipNetToMediaPhysAddress.5.10.1.1.101 = STRING: 0:1b:d5:13:10:4a
IP-MIB::ipNetToMediaPhysAddress.5.10.1.1.107 = STRING: f0:18:98:6a:18:c
IP-MIB::ipNetToMediaNetAddress.5.10.1.1.1 = IpAddress: 10.1.1.1
IP-MIB::ipNetToMediaNetAddress.5.10.1.1.101 = IpAddress: 10.1.1.101
IP-MIB::ipNetToMediaNetAddress.5.10.1.1.107 = IpAddress: 10.1.1.107
IP-MIB::ipNetToMediaType.5.10.1.1.1 = INTEGER: dynamic(3)
IP-MIB::ipNetToMediaType.5.10.1.1.101 = INTEGER: static(4)
IP-MIB::ipNetToMediaType.5.10.1.1.107 = INTEGER: dynamic(3)