SSID missing after introducing AP Groups

[davegibelli]

I have created two AP groups but I am only seeing the first SSID being broadcast in each group even though there are two SSID's in group 1 and three in group 2.

It is a 2504 WLC running 8.2.151.0 and the AP's are 3702, any ideas?

[Flavio Miranda]

Hi,

 Those WLANs are in enable status?

[Leo Laohoo]

Post the complete output to the command "sh wlan summary".

[davegibelli · Accepted solution]

The SSID were broadcast as expected, I was given incorrect information from management!

So never trust the information you are given.