10-18-2016 12:33 AM - edited 07-05-2021 05:59 AM
Hi Team,
We have installed Cisco Controller with 22 AP's with one of our client.
When we connected through AP the gateway which is configured in L3 switch pinging with high latency(File attached).
We have configured multiple vlan, the SSID which configured in device disappears automatically and after few second it again visible.
Kindly suggest your expertise o resolve the issue asap.
Regards,
Vijay Gond
10-18-2016 01:33 AM
What is your WLC model & software version running on it ? If possible post "show sysinfo" output from your WLC.
Did you notice this issue with all client types or particular clients only ?
HTH
Rasika
10-18-2016 02:00 AM
Hello,
WLC Model No-2504,
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.3.102.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.101.1
Firmware Version................................. PIC 20.0
Regards,
Vijay Gond
10-18-2016 02:48 AM
Try to download& upgrade SW on WLC.
Download Link: https://software.cisco.com/download/release.html?mdfid=283848165&flowid=24841&softwareid=280926587&release=7.4.150.0&relind=AVAILABLE&rellifecycle=MD&reltype=latest
Regards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide