10-12-2016 08:40 AM - edited 07-05-2021 05:57 AM
Where is the best place in the config file to turn on netflow on a 5508 wireless controller? Which template will it export v5 or v9?
10-12-2016 04:54 PM
Refer below. It was not standard netflow back in the days (I used 7.4 .x codes that time) & you had to use Cisco supported netflow collector (Scrutinizer supported it)
https://mrncciew.com/2013/02/13/who-really-support-wlc-netflow/
https://mrncciew.com/2013/02/12/configuring-netflow-on-wlc-7-4/
HTH
Rasika
*** Pls rate all useful responses ***
10-13-2016 06:01 AM
Rasika,
Thanks for the information. and the excellent write-ups you did in the referenced articles. It should be helpful.
Doug
10-13-2016 04:49 PM
Thank you Doug..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide