04-09-2007 04:06 PM - edited 07-03-2021 01:54 PM
Hi, I have the AP, AIR-AP1230B-A-K9, and I need upgrade it, so that it works like a LAP, How I do it?
04-10-2007 12:37 AM
Hi
You first need to download the LAP code and the LAP Upgrade Tool from Cisco's website. Once done, you then create a .txt file with the information of the AP (IP Address, Username, Password, Enable Password) and insert it into the tool. The Tool has a built in TFTP Server and if pointed to the correct directory (where the LAP Code is) it will upgrade the AP automatically for you.
All Done!!
Cheers
Steven
04-10-2007 01:04 AM
Hi Ricardo
I did some checking as well. Unfortunately the 1230B is not supported on the LWAPP Upgrade.
You will need to upgrade the hardware.
Cheers
Steven
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide