05-21-2023 11:43 PM
I have an Cisco® Business 240AC Access Point
Part Number | CBW240AC-x |
it's has frimware issue the light still red
and it disapper from the controller
is there any way to upload new frimware using TFTP
05-22-2023 12:09 AM
M.
05-22-2023 01:51 AM - edited 05-22-2023 01:52 AM
as i said before
the ap didnot appear in the controller and it's has a frimware issue the light of the ap is solid red
i want the manual frimware update with out the controller
05-22-2023 02:00 AM
- These APs don't use a controller ,
M.
05-22-2023 04:29 AM
i have another AP works as a controller and many AP's that have been connected to that controller
05-22-2023 04:48 AM
- That's probably a mesh network ; you still have to use the mentioned procedure for upgrading the particular AP locally ,
M.
05-22-2023 06:43 AM
Hi
Try to factory reset the AP first. It is a simple procedure and may fix the problem.
Go to "Reset to Factory Settings Using an Open Paperclip"
05-22-2023 08:18 AM
Have you checked this doc?
https://www.cisco.com/c/en/us/support/docs/smb/wireless/CB-Wireless-Mesh/kmgmt-2322-flashing-red-LED-pattern-day-zero-setup-CBW.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide