08-22-2013 07:57 AM - edited 07-04-2021 12:42 AM
Hi,
Is it possible to use LAP as a bridge to connect another LAP into the network?
WLC:5508 ver.7.0.235.0
LAPs: AIR-CAP3502E-E-K9 or AIR-CAP3502I-E-K9
Solved! Go to Solution.
08-22-2013 08:20 AM
Only if you are using the mesh feature which means there has to be a RAP and a MAP. Point to point bridging isn't supported in lightweight.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080b1c101.shtml
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
08-22-2013 08:20 AM
Only if you are using the mesh feature which means there has to be a RAP and a MAP. Point to point bridging isn't supported in lightweight.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080b1c101.shtml
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
08-23-2013 07:08 AM
Thanks Scott,
Just to add the link is not really updated but I was able to get a newer version which said 3500 series is also supported from version 7.0.116
http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.0MR1/design/guide/MeshAP_70MR1.html
08-23-2013 07:13 AM
Many of their docs have not been updated, but generally as configured the same. I think many of the old ones explain things better and I tend to have saved and reference. Glad it helped though.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide