Want to Upgrade my CISCO1941W-E/K9 with AP801AGN-E-K9 to latest software.

[takenek2016]

Hello Guys,

I have a Cisco router 1941W for my little lab that has an AP801 access point built into it.

I want to upgrade the software for my Router and 801AP to a newer version because i got all the time problems with WiFi.....

Here is what it is currently running:

Router#show version

Cisco CISCO1941W-E/K9 (revision 1.0) with 483328K/40960K bytes of memory.
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.4(3)M5, RELEASE SOFTWARE (fc1)

ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)

ap#show version

cisco AP801AGN-E-K9 (PowerPC 8343) processor (revision C0) with 49142K/16384K bytes of memory.

Cisco IOS Software, AP801 Software (AP801-K9W7-M), Version 15.2(2)JA1, RELEASE SOFTWARE (fc1)

ROM: Bootstrap program is AP801 boot loader
BOOTLDR: AP801 Boot Loader (AP801-BOOT-M) Version 12.4(10b)JDA3, RELEASE SOFTWARE (fc1)

Can you advise me as to how I can find the latest software on the Cisco.com.

Because when i try find on Cisco Download for AP801 i see last version: ap801-k9w7-tar.152-2.JA1.tar but when i find via Cisco 1941W i see newlatest Autonomous AP IOS Software is: ap802-k9w7-tar.152-2.JB5.tar ( but this is AP802 and this i don`t understand... )

And another question i need to upgrade Boot Loader/Bootstrap for Router and AP?

Thanks

TaKeN

[Leo Laohoo]

ap802-k9w7-tar.152-2.JB5.tar

I don't believe this filename is compatible with an AP801.

And another question i need to upgrade Boot Loader/Bootstrap for Router

If the IOS of the router is going to get upgraded, then it's won't hurt to upgrade the Bootstrap either.

[takenek2016]

Thanks for Your answer.

So can You tell me what IOS and Boot Loader is newlatest for my: CISCO1941W-E/K9 with AP801AGN-E-K9 ?

Please give me link or filename.

Thanks

TaKeN

[Leo Laohoo]

Router ROMmon 15.0(1r)M16 is the latest one, so it's fine. 

As for the AP, I'm not certain.  If there is more than enough flash space in the AP, what you could try is to un-pack the latest "AP802" version and force the AP to boot the new IOS and leaving the old "AP801" firmware.  IF the "AP802" firmware fails to load the AP will load the next available firmware.

[takenek2016]

Anyone else mayby know what is the last working version IOS/ROMMON for 

CISCO1941W-E/K9 with AP801AGN-E-K9?

Thanks

TaKeN

[takenek2016]

Not working... looks like i need from AP801...

Mayby someone else can help?

[8mchmelik]

I am using C1941W with AP801-K9W7-M:
Cisco IOS Software, AP801 Software (AP801-K9W7-M), Version 15.2(2)JA1, RELEASE SOFTWARE (fc1)

This is the lastest Autonomous 801 Image. Too old, form January 2013

https://software.cisco.com/download/home/286077844/type/284180979/release/15.2.2-JA1

This is the result with upgrading to AP802 IOS is:

Loading "flash:/ap802-k9w7-mx.153-3.JC5/ap802-k9w7-mx.153-3.JC5"...Bootable image segment 0 address range [0x18003000, 0x1b51e440] not in range [0x3000, 0x2280000].
Error loading "flash:/ap802-k9w7-mx.153-3.JC5/ap802-k9w7-mx.153-3.JC5"

Is is possible to upgrade AP module inside the router?

[mohanak]

Refer link : https://software.cisco.com/download/release.html?mdfid=286077844&softwareid=280775090&os=&release=15.3.3-JA5&relind=AVAILABLE&rellifecycle=&reltype=latest&i=!pp

[takenek2016]

hey but this is Lightweight AP, and i have if i good understand autonomous.

In configuration of router got:

service-module wlan-ap 0 bootimage autonomous

Thanks

[takenek2016]

Hello Guys,

Anyone with experience can help me?

Thanks!

TaKeN