07-23-2010 02:52 PM - edited 07-03-2021 07:00 PM
We are moving the wcs (7.0.164) and MSE (7.0.105) servers behind a stateful firewall. Which inbound ports are needed open in the firewall for the controllers to comunicate with the application?
Thanks for any info.
Jorge.
07-23-2010 03:14 PM
WCS uses the following ports:
Advent Net (WebNMS) | 2000 |
Database | 1315 |
FTP | 21 |
HTTP Connector | 8456 |
HTTP Connector Redirect | 8457 |
HTTP | 80 |
HTTPS | 443 |
RMI | 1299 |
TFTP | 69 |
SNMP | 161, 162 |
Web Container | 8009 |
Location Server | 8001 |
For the controller to talk to the access points you need to allow capwap or lwapp ports.
05-30-2011 05:28 AM
Hi Lucien,
Thank you for this answer.
The list provided in the Prerequisites section of the "Cisco Wireless Control System Configuration Guide" (release 7.0, pg 2-1)is not exaclty the same:
- HTTP: configurable during install (80 by default)
–HTTPS: configurable during install (443 by default)
–1315
–1299
–6789
–8009
–8456
–8005
–69
–21
–162
–8457
Moreover, on the Wireless Control System (WCS) Troubleshoot FAQ web page (http://www.cisco.com/en/US/products/ps6305/products_qanda_item09186a00807a60f0.shtml), they talk about the UDP port 169 (trap receiver). I suppose it is an error and they mean UDP port 162.
Can you confirm that the ports list you provided is correct?
Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide