cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1048
Views
10
Helpful
11
Replies

WCS to NCS migration

vijay kumar
Level 2
Level 2

Hi ,

We are trying to migrate WCS base license to NCS 1.1 .

We have procured the migration license .

In the licensing guide , it is mentioned as

"L-WCS-NCS1-M-K9 License first, before adding the licenses migrated from your WCS installation"

I got some confusion here.

1)Whether we need to add this migration license in WCS before genrating XML file or

2)Before adding XML file in NCS we need to add this in NCS ..

Regards,

Vijay.

1 Accepted Solution

Accepted Solutions

Typically is you go from WCS 7.0.220.0 or later to NCS 1.0, you need to export the WCS license and paste the XML on the licensing tool when generating the NCS 1.0 license. If you have the WCS to NCS 1.1, you don't have to export the XML as you would be sold the addr license for what you currently have on WCS.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

11 Replies 11

vijay kumar
Level 2
Level 2

And one more question ,

3) We got migration license from WCS o NCS . In future I want to upgrade to PI , shoud I have to purchase one more license?

What version of WCS are you currently on now?

7.0.240

Typically is you go from WCS 7.0.220.0 or later to NCS 1.0, you need to export the WCS license and paste the XML on the licensing tool when generating the NCS 1.0 license. If you have the WCS to NCS 1.1, you don't have to export the XML as you would be sold the addr license for what you currently have on WCS.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

ok .thanks for the reply . anyway I have this

L-WCS-NCS1-M-K9 PAK .How and where to use this .? Kindly help

Hello,

We are planing to upgrade WCS to NCS 1.1.

We are having:

L-WCS-NCS1-M-K9     WCS to NCS 1.0 Migration, 25 Bonus licenses included

Can we use these PAK for NCS 1.1 and do you know the right procedure for generating license?

Any help will be very appreciated.

Kind Regards,

Jelena

Scott Fella
Hall of Fame
Hall of Fame

Yes you can. First you have to upgrade and then you go online to register your pak to the virtual machine serial number.

http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/warr.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Thank you for your quick response.

It is very helpful.

I have just one more question:

Can we then perform the upgrade from NCS 1.1 to Cisco PI 1.3 without any aditional licenses?

Best Regards,

Jelena

Yup.. No issues

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Thank you very much for your quick response.

Best Regards,

Jelena

No problem and good luck with the upgrade. Make sure you check out the support doc.

https://supportforums.cisco.com/docs/DOC-26973

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Review Cisco Networking for a $25 gift card