Web Authentication Login guests to http

[johan oosterwaal]

hello everybody

i have a question..

is it possible to change the web authentication login from https://1.1.1.1

to http://1.1.1.1

this is for to avoid the certificate error that you get when logging in to the web page.

[Stephen Rodriguez]

If you are running 7.2 or better for your code version it is.

Config network web-auth secureweb disable

If you are below 7.2 you have to completely disable https for mgmt as well

Sent from Cisco Technical Support iPhone App

[johan oosterwaal]

Thanks that work!!

Sent from Cisco Technical Support iPhone App

[David Santos]

Why don't You see what's happening with the certificates?



Sent from Cisco Technical Support iPad App

[Erik Boss]

or just install a valid certificate from Globalsign, Verisign and so on

Good work!

Regards,

Erik

[johan oosterwaal]

stephen Rodriguez

you say that if i had a version 7.2 or better i could disable the guest webpage separate from the mgmt ?

[Scott Fella · Accepted solution]

You can, but on 7.2 it was broke. I know the feature works on v7.3 and 7.4 since I recently tested it. On the lower code versions you would still have to disable https for management to get that to work.

Sent from Cisco Technical Support iPhone App

[Scott Fella · Accepted solution]

Here is a screen shot

Sent from Cisco Technical Support iPhone App