06-05-2019 07:56 AM - edited 07-05-2021 10:31 AM
HI Band n is much faster. We replaced ap1131 with ap3502. but when we tested it with PC close to the 3502, we still get band g. How can we get band n as it is more fast? Thank you
06-05-2019 10:17 AM
Hi
Does the PC wireless NIC support 802.11n? Data rates have to be supported by both AP and client.
Are the drivers up-to-date?
06-05-2019 10:26 AM
I use the same PC to test. In the same network, I can find band n in another AP3602.
06-05-2019 12:47 PM
Hi,
When the client connects to the AP and the client continuously agree on a speed. Often its a good Idea to create a RF profile for the site that disables the lower speeds if you know that all clients supports the higher ones. This will not only help with client speeds but it will also help with roaming sense the client needs to change AP earlier to be able to keep the higher speeds.
regards,
Jonas
**Don't forget to rate helpful posts**
06-05-2019 04:23 PM
The same PC was moved to ap3602 and then it can get band n. so that means this might be AP or wlc configuration issue. but do not know where the exact issue is.
06-06-2019 12:53 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide