08-31-2020 08:50 PM - edited 07-05-2021 12:27 PM
Hi all,
I have been curious on how we are able to limit a Wifi access time of users. For example, a guest user is only allowed to access Wifi for 2 hours. I'd also like to know about setting up one-time Wifi password.
Is the combination of Cisco WLC and Radius Server enough & capable of doing this? or it is actually required more resources?
Could any one who has had these kinds of settings done before please share me some insights?
I'm actually self-studying CCNA Wireless but don't mind going beyond its topics.
Regards
08-31-2020 10:59 PM
Yes its possible with WLC and cisco ISE combination.
Go through this post:
Regards
Dont forget to rate helpful posts
09-01-2020 06:29 AM
Thank Sandeep for sharing a link and I would look into this.
Another question if you don't mind, does ISE also support one-time wifi password setup?
I was searching for this but got no luck.
09-01-2020 05:22 AM
09-01-2020 06:24 AM
Hi Scott,
I completely agree with you that limiting wifi access time to 2 hours every session doesn't seem practical. However it is just an example for my main question regarding what combination of hardware or software resources (such as WLC, ISE, Radius Server, etc) which is capable of fulfilling my requirements like time restriction, one-time password and so on.
Basically these are some of tasks that I'm planning to do in my lab enviroment.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide