cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1819
Views
0
Helpful
3
Replies

Wireless client does not resolve DNS

I installed Controller 4402 with 44 1252 APs.  It just seems the wireless network is not passing dns info when a laptop is connected thru wireless (only able to ping by its IP adress) , but when same machines  are wired they communicate fine by machine name.

Both networks are in the same subnet.

Thanks for providing the answer.

3 Replies 3

George Stefanick
VIP Alumni
VIP Alumni

Do you have a virtual address set on your WLC if so what is it?

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

Yes, it has a virtual IP address:  1.1.1.1

Thanks George.

balajirajahpb
Level 1
Level 1

You need to check how the DHCP scope is defined for the wireless client. Under Controller--> internal DHCP Server--> DHCP Scope--> verify the DHCP scope and DNS server address pointed to.

Review Cisco Networking for a $25 gift card