09-17-2019 10:28 PM - edited 07-05-2021 11:01 AM
Hello.
I'm a beginner engineer who started my network management career.
I manage wireless network services using WLC 5508 and 2702 AP.
Wireless clients continue to experience symptoms of not being able to connect to the AP's signal.
In addition, connected clients are experiencing intermittent loss of connection.
I tried to look up the data and deal with it, but it didn't work out easily, so I'd like to ask for help.
Thank you.
09-17-2019 11:28 PM
What software version running on your 5508 ? "show sysinfo" output on WLC CLI will provide that info (if not WLC GUI page)
Rasika
09-17-2019 11:37 PM
09-18-2019 02:19 AM
Thanks for sharing that info.
You are running 8.2.x version which is bit old. So it is better to go with later code (8.5.151.0 at least). Anayway check what AP models you got (I know you said 2702, is that the only model or you got mix of different models). Check below document & make it a bookmark for future reference
https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#56735
Before come to a conclusion, do bit more investigating & find out what clients having this issue (phones,tablet,laptops) & what operating system they running. If issue is only to particular device type, then pay attention to wireless drivers & its firmware version. You may be able to find some co-relation.
HTH
Rasika
*** Pls rate all useful responses ***
09-18-2019 03:09 AM
09-24-2019 07:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide