02-22-2019 12:54 AM - edited 07-05-2021 09:55 AM
I have a Cisco WLC 2504 running 8.5.120.0 software version connected to two APs AIR-AP1852I-S-K9. I have a problem with wifi connectivity that an user is disconnected from WLAN when walking from AP1 to AP2 coverage. And the log shows that the user cannot authenticate. The SSID is using [WPA2][Auth(PSK)] to authenticate. We confirm the user is using the correct password.
*Dot1x_NW_MsgTask_3: Feb 22 15:35:05.052: %DOT1X-3-PSK_CONFIG_ERR: 1x_ptsm.c:729 Client a0:99:9b:1b:f1:bb may be using an incorrect PSK
*Dot1x_NW_MsgTask_3: Feb 22 15:11:03.329: %DOT1X-3-PSK_CONFIG_ERR: 1x_ptsm.c:729 Client a0:99:9b:1b:f1:bb may be using an incorrect PSK
*Dot1x_NW_MsgTask_3: Feb 22 15:07:41.101: %DOT1X-3-PSK_CONFIG_ERR: 1x_ptsm.c:729 Client a0:99:9b:1b:f1:bb may be using an incorrect PSK
Can anyone help on it? Thanks.
02-22-2019 05:06 AM
If it's only affecting one user, try to update the network driver of the end device.
<<< Please help the community by marking useful posts helpful, or accept as a solution if it resolved your issue >>>
02-22-2019 07:03 AM
Hi,
We can list some reasons for that. Coverage problem is one of them. High channel utilization is a second one. Client driver also can be the problem.
Try to debug while moving and share the whole conversation with us.
-If I helped you somehow, please, rate it as useful.-
02-23-2019 04:37 AM
@kris yip wrote:
I have a Cisco WLC 2504 running 8.5.120.0 software version
Stop right there.
I am not troubleshooting any wireless issue until the controller is upgraded to, a minimum, 8.5.135.0. Period.
02-23-2019 06:20 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide