cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7236
Views
35
Helpful
18
Replies

Wireless controller 5508 and AP2802

Khuongnguyen78670
Community Member

Dear Friends

Currently, I have a case Please help me

My laptop uses the ax201 card. the laptop can access the wifi through 802.1x. But when I used it for about 1 hour, then it automatically lost the connection.

Thanks

 

18 Replies 18

Hi Friend.

 

I captured log from the wireless controller When the client lost connection

I think the driver with the fix is not yet release. 22.100.1 is the latest published release, but that’s not the version that fixes the issue. Now when you look at this overall, this issue is not with Cisco wireless but with Intel. You should open a support case with Intel or even start your own thread on their forum.  That would be a better place to start. 

-Scott
*** Please rate helpful posts ***

I already update latest Driver package 22.100.1. But it's still the same issue

22.100.1 is NOT the latest driver.

As we have all explained to you - you must request the latest driver (which is 22.110.x or higher) from Intel.

------------------------------
Please click Helpful if this post helped you and Accept as Solution if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
AP supported channel lookup: https://apchannels.cisco.com/
Review Cisco Networking for a $25 gift card