cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
218
Views
0
Helpful
3
Replies

Wireless interference

bhunt7
Beginner
Beginner

 Will a Cisco 2602i access-point interfere with another Cisco 2062i access-point if both have the A radio enabled but have different SSID's? They are physically installed with 10 feet of each other but, are used for different purposes. the SSID's are in different AP-GROUP's.

3 REPLIES 3

mickyq
Beginner
Beginner

assuming they are connected to a controller, the controller will change the frequency they use so they dont overlap.

 They are connected to a controller but I don't want the frequency to change. They both need to run 5Ghz. The Channel assignment is dynamic and SSID is different.  Should I manually set the power or can I have RRM enabled. I don't want the access-points power to drop way down due to the access-points to seeing each other.

theres 23 none overlapping channels on the 5mhz so two AP's close to each wont affect each other. the different SSID's wont make any difference. Interference is all down to AP's using the same channel. The controller will change the channel on each AP so they dont overlap.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: