cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
707
Views
0
Helpful
3
Replies

WLAN Controller/ACS Not Authenticating

Hi

I have 2 WLAN Controllers in different cities. When I authenticate via the 1 to a local ACS server it works but from the other one I get "EAP Type not Configured" on the ACS logs. Both on the same OS, same ACS server and identical configuration. Only difference is one is 4402-12 and the other 4402-25.

Any Ideas?

3 Replies 3

Scott Fella
Hall of Fame
Hall of Fame

It doesn't seem like your configurations are correct. Check the ACS policy for both AAA clients.

-Scott
*** Please rate helpful posts ***

Where would I check this policy? I have added both devices in as clients and the way they are added is identical. Please advise

Problem Sorted.

The issue was with the certificate on the ACS device as well.

Uploaded a new CSR to the CA, signed it and uploaded it onto the ACS. Also installed a new cert from the CA on the user machine and all is working now.

Review Cisco Networking for a $25 gift card