01-17-2020 11:42 AM - edited 07-05-2021 11:33 AM
Hello all,
I'm in the process of deploying a new customer site and I'm finding the wireless speeds to be less than ideal. The infrastructure is all new and there are no users online yet. Topology includes an ASA5512x , C9500-16x stacked and C9300-48Ps. The WAN circuit is 500M/1G burstable. My wired speeds are consistently 600/800+ up/down and my wireless throughput is at most ~150M down and ~450 up. There are only 17 active APs at the moment and I am aiming for symmetrical up/down throughput considering there is no active traffic on the network.
Can you guys point me in the right direction on what settings I should pay extra attention to on the controller? Among other things:
Thanks in advance,
-AT
01-17-2020 03:35 PM
01-17-2020 03:35 PM - edited 01-17-2020 03:36 PM
I'd be looking at what is going on at the FW first.
Next, on the switch: Are there any total output drops to the AP ports and the uplink?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide