Solved: Re: WLC 3504 Unable to see AP 1560 - Page 2

HunterMathews2967 · ‎12-09-2019

First time setting up a network with WLC.

WLC is configured and can both web browse and SSH into it. It currently has 1 SSID configured. I hardwire one of the APs into port 3 (PoE port) and it doesn't receive the SSID configuration.

WLC Firmware is 8.5.140.0

Rps-Cheers · ‎12-09-2019

Could you check whether WLAN set broadcast and 802.11a/b enable status ?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

HunterMathews2967 · ‎12-09-2019

WLAN Identifier.................................. 1
Profile Name..................................... Plant Network
Network Name (SSID).............................. CISCO2_Test
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled

802.11a Network.................................. Enabled
802.11b Network.................................. Enabled

Rps-Cheers · ‎12-09-2019

OK, and is the power status full of ap?
In addtion, AP can join wlc,just cannot broadcast ssid,right?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

HunterMathews2967 · ‎12-09-2019

It cannot join the WLC

Rps-Cheers · ‎12-09-2019

I have saw this info:
1\AP Running Image : 8.5.140.0
2\capwap ap mode local
3\WLC time setting.

If it still cannot register to wlc,Could you please collect debug info:
WLC debugs:
WLC> debug mac addr < AP MAC address >
WLC> debug capwap errors enable
WLC> debug capwap events enable
WLC> debug dtls all enable
WLC> debug pm pki enable
To disable debugs: debug disable-all

AP debugs:
AP# debug capwap client event
AP# debug capwap client error
AP# debug capwap client detail
AP# debug dtls client error
AP# debug dtls client event
To disable debugs: u all

BR

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

HunterMathews2967 · ‎12-10-2019

Debug from AP:

[*10/20/2019 13:28:28.9371] DOT11_DRV[0]: set_channel Channel set to 1
[*10/20/2019 13:28:29.2403] DOT11_DRV[0]: set_channel Channel set to 1
[*10/20/2019 13:28:29.2502] DOT11_DRV[0]: set_channel Channel set to 1
[*10/20/2019 13:28:29.6953] bftype is 6
[*10/20/2019 13:28:29.7120] DOT11_DRV[0]: set_channel Channel set to 1
[*10/20/2019 13:28:30.0564] DOT11_DRV[0]: set_channel Channel set to 1
[*10/20/2019 13:28:30.3618] DOT11_DRV[1]: set_channel Channel set to 36
[*10/20/2019 13:28:30.6703] DOT11_DRV[1]: set_channel Channel set to 36
[*10/20/2019 13:28:30.9775] DOT11_DRV[1]: set_channel Channel set to 36
[*10/20/2019 13:28:30.9875] DOT11_DRV[1]: set_channel Channel set to 36
[*10/20/2019 13:28:31.4861] bftype is 6
[*10/20/2019 13:28:31.4992] DOT11_DRV[1]: set_channel Channel set to 36
[*10/20/2019 13:28:31.8930] DOT11_DRV[1]: set_channel Channel set to 36
[*10/20/2019 13:28:32.2929] DOT11_DRV[1]: set_channel Channel set to 36
[*10/20/2019 13:28:36.4133] Waiting for uplink IPv4 configuration
[*10/20/2019 13:28:41.4144] Waiting for uplink IPv4 configuration
[*10/20/2019 13:28:46.4155] Waiting for uplink IPv4 configuration
[*10/20/2019 13:28:47.4156] Resetting wired0 and[10/20/2019 13:28:47.4400] wired0: stopped
 restart DHCP client
[10/20/2019 13:28:49.5200] wired0 emac 1: link up
[10/20/2019 13:28:49.5800] wired0: link up
[10/20/2019 13:28:49.6200] wired0: started
[*10/20/2019 13:28:49.6836] aptrace_register_sysproc_fn: duplicate registeration for 'wired'
[*10/20/2019 13:28:53.7895] Waiting for uplink IPv4 configuration
[*10/20/2019 13:28:58.7906] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:03.7917] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:04.7919] Resetting wired0 and[10/20/2019 13:29:04.8200] wired0: stopped
 restart DHCP client
[10/20/2019 13:29:06.9000] wired0 emac 1: link up
[10/20/2019 13:29:06.9500] wired0: link up
[10/20/2019 13:29:07.0000] wired0: started
[*10/20/2019 13:29:07.0600] aptrace_register_sysproc_fn: duplicate registeration for 'wired'
[*10/20/2019 13:29:11.1657] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:16.1669] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:21.1680] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:22.1682] Resetting wired0 and[10/20/2019 13:29:22.1900] wired0: stopped
 restart DHCP client
[10/20/2019 13:29:24.2800] wired0 emac 1: link up
[10/20/2019 13:29:24.3300] wired0: link up
[10/20/2019 13:29:24.3800] wired0: started
[*10/20/2019 13:29:24.4367] aptrace_register_sysproc_fn: duplicate registeration for 'wired'
[*10/20/2019 13:29:28.5424] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:33.5435] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:38.5446] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:39.5447] Resetting wired0 and[10/20/2019 13:29:39.5700] wired0: stopped
 restart DHCP client
[10/20/2019 13:29:41.6600] wired0 emac 1: link up
[10/20/2019 13:29:41.7200] wired0: link up
[10/20/2019 13:29:41.7600] wired0: started
[*10/20/2019 13:29:41.8131] aptrace_register_sysproc_fn: duplicate registeration for 'wired'
[*10/20/2019 13:29:45.9199] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:50.9210] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:55.9220] Waiting for uplink IPv4 configuration
[*10/20/2019 13:29:56.9222] Resetting wired0 and[10/20/2019 13:29:56.9500] wired0: stopped
 restart DHCP client
[10/20/2019 13:29:59.0400] wired0 emac 1: link up
[10/20/2019 13:29:59.0900] wired0: link up
[10/20/2019 13:29:59.1400] wired0: started
[*10/20/2019 13:29:59.1866] aptrace_register_sysproc_fn: duplicate registeration for 'wired'
[*10/20/2019 13:30:03.2927] Waiting for uplink IPv4 configuration

Debug from WLC:

*osapiBsnTimer: Dec 10 15:24:19.705: Same gateway prevails
*osapiBsnTimer: Dec 10 15:24:29.623: Same gateway prevails
*osapiBsnTimer: Dec 10 15:24:39.541: Same gateway prevails
*osapiBsnTimer: Dec 10 15:24:49.459: Same gateway prevails
*osapiBsnTimer: Dec 10 15:24:59.377: Same gateway prevails
*osapiBsnTimer: Dec 10 15:25:09.294: Same gateway prevails
*osapiBsnTimer: Dec 10 15:25:19.212: Same gateway prevails
*osapiBsnTimer: Dec 10 15:25:29.130: Same gateway prevails
*sshpmLscTask: Dec 10 15:25:37.858: sshpmLscTask: LSC Task received a message 4
*osapiBsnTimer: Dec 10 15:25:39.048: Same gateway prevails
*osapiBsnTimer: Dec 10 15:25:48.966: Same gateway prevails
*osapiBsnTimer: Dec 10 15:25:58.884: Same gateway prevails
*osapiBsnTimer: Dec 10 15:26:08.802: Same gateway prevails
*osapiBsnTimer: Dec 10 15:26:18.720: Same gateway prevails
*osapiBsnTimer: Dec 10 15:26:28.638: Same gateway prevails
*osapiBsnTimer: Dec 10 15:26:38.555: Same gateway prevails
*osapiBsnTimer: Dec 10 15:26:48.473: Same gateway prevails
*osapiBsnTimer: Dec 10 15:26:58.391: Same gateway prevails
*osapiBsnTimer: Dec 10 15:27:08.309: Same gateway prevails
*osapiBsnTimer: Dec 10 15:27:18.227: Same gateway prevails

Leo Laohoo · ‎12-10-2019

1. Nowhere in the console output says whether or not the AP got a valid IP address or not; and
2. Look at the time and date.
If the controller has the wrong time and date, the APs will not join.

Rps-Cheers · ‎12-10-2019

The debug information here has no critical information, and the AP should not have an IP address.You can wait for the AP to fully boot up and obtain an IP address before trying to debug

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

Leo Laohoo · ‎12-09-2019

Console into the AP and reboot.
Post the entire boot-up process.

HunterMathews2967 · ‎12-10-2019

boot of AP

BootROM - 1.78
Booting from SPI flash, Secure mode
BootROM: RSA Public key verification PASSED
BootROM: CSK block signature verification PASSED
BootROM: Boot header signature verification PASSED
BootROM: Box ID verification PASSED
BootROM: JTAG is disabled


General initialization - Version: 1.0.0
Detected Device ID 6920
Master bootloder version 1.24
High speed PHY - Version: 2.0
BoardId = 0x23board SerDes lanes topology details:
 | Lane # | Speed|    Type     |
 ------------------------------|
 |   1    |  0   |  SGMII1     |
 |   2    |  5   |  PCIe1      |
 |   4    |  5   |  PCIe2      |
 -------------------------------
:** Link is Gen1, check the EP capability
PCIe, Idx 1: Link upgraded to Gen2 based on client cpabilities
:** Link is Gen1, check the EP capability
PCIe, Idx 2: Link upgraded to Gen2 based on client cpabilities
High speed PHY - Ended Successfully
DDR4 Training Sequence - Ver TIP-0.23.(Sublib 0.8)0
DDR4 Training Sequence - Switching XBAR Window to FastPath Window
DDR4 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED
BootROM: Boot image signature verification PASSED

  ____  _
 / ___|(_) ___   ___  ___
| |    | |/ __| / __|/ _ \
| |___ | |\__ \| (__| (_) |
 \____||_||___/ \___|\___/
         _   _     ____              _
        | | | |   | __ )  ___   ___ | |_
        | | | |___|  _ \ / _ \ / _ \| __|
        | |_| |___| |_) | (_) | (_) | |_
         \___/    |____/ \___/ \___/ \__|
 ** LOADER **


U-Boot 2013.01-gf899470 (Aug 16 2018 - 15:50:45) SDK version: 2015_T2.0p10

Board: Milos
SoC:   MV88F6920 Rev A1
       running 2 CPUs
CPU:   ARM Cortex A9 MPCore (Rev 1) LE
       CPU 0
       CPU    @ 1800 [MHz]
       L2     @ 900 [MHz]
       TClock @ 250 [MHz]
       DDR4    @ 900 [MHz]
       DDR4 32 Bit Width,FastPath Memory Access, DLB Enabled, ECC Disabled
DRAM:  1 GiB

RST I2C0
NAND:  256 MiB
SF: Detected MX25L3205D with page size 64 KiB, total 4 MiB
PCI-e 1 (IF 0 - bus 0) Root Complex Interface, Detected Link X1, GEN 2.0
PCI-e 2 (IF 1 - bus 1) Root Complex Interface, Detected Link X1, GEN 2.0

Map:   Code:                    0x3fed9000:0x3ffad5c4
       BSS:                     0x3ffef080
       Stack:                   0x3f9c8f20
       Heap:                    0x3f9c9000:0x3fed9000
       U-Boot Environment:      0x00100000:0x00110000 (SPI)

Board configuration:
|  port  | Interface  | PHY address  |
|--------|------------|--------------|
| egiga1 |   SGMII    |     0x01     |
SFP not detected, enable RJ45
Net:   , egiga1 [PRIME]
Hit ESC key to stop autoboot:  0
Creating 1 MTD partitions on "nand0":
0x000000200000-0x000010000000 : "mtd=2"
UBI: attaching mtd1 to ubi0
UBIFS: mounted UBI device 0, volume 0, name "part1"
Loading file 'part1/part.bin' to addr 0x02000000 with size 39628761 (0x025cafd9)...
Done
SF: Detected MX25L3205D with page size 64 KiB, total 4 MiB

Checking image signing.
Image signing verification success, continue to run...
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Barbados Firmware Image
   Created:      2018-11-25   6:11:24 UTC
   Image Type:   ARM Linux Multi-File Image (uncompressed)
   Data Size:    39627753 Bytes = 37.8 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Contents:
      Image 0: 4021456 Bytes = 3.8 MiB
      Image 1: 35590513 Bytes = 33.9 MiB
      Image 2: 15765 Bytes = 15.4 KiB
   Verifying Checksum ... OK
## Loading init Ramdisk from multi component Legacy Image at 02000000 ...
## Flattened Device Tree from multi component Image at 02000000
   Booting using the fdt at 0x045c6e94
   Loading Multi-File Image ... OK
OK
   reserving fdt memory region: addr=0 size=4000
   Loading Device Tree to 01ff9000, end 01fffd94 ... OK

   Starting Device Tree update ('fdt_skip_update' = no)

Limit DDR size at 3GB due to power of 2 requirement of Address decoding
Updating device tree successful

Starting kernel ...

[01/01/1970 00:00:00.0000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
[01/01/1970 00:00:00.0000] Memory: 993484K/1048576K available (5460K kernel code, 398K rwdata, 2448K rodata, 351K init, 465K bss, 55092K reserved)
[01/01/1970 00:00:00.1200] CPU1: Booted secondary processor
[01/01/1970 00:00:08.8900] buginf tty flushing thread started, ttyport=be8aa000
[01/01/1970 00:00:09.0100] m25p80 spi1.0: found mx25l3206, expected n25q032
[01/01/1970 00:00:09.3200] lp5521 0-0030: device detection err: -6
[01/01/1970 00:00:10.1100] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 20, need 32
[*01/01/1970 00:00:10.2562] buginf() enabled.
[*01/01/1970 00:00:10.2648] Made it into bootsh: Nov 24 2018 22:06:05
[*01/01/1970 00:00:10.2650] bootsh build T-b1c4d316cf409bad6ec9cbf2958c6014776e95f2-gb1c4d316-vipendya
[*01/01/1970 00:00:10.2650] bootsh mini ramfs booted
[*01/01/1970 00:00:17.5036] 241942 blocks

Welcome to Cisco.

Usage of this device is governed by Cisco's End User License Agreement,
available at:
http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.


             Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

            Cisco Systems, Inc.
            170 West Tasman Drive
            San Jose, California 95134-1706

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html


This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html


This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html


This product contains some software licensed under the
"GNU General Public License, version 3" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, Version 3", available here:
http://www.gnu.org/licenses/gpl.html.


This product contains some software licensed under the
"GNU Affero General Public License, version 3" provided
with ABSOLUTELY NO WARRANTY under the terms of
"GNU Affero General Public License, version 3", available here:
http://www.gnu.org/licenses/agpl-3.0.html.

init started: BusyBox v1.23.2 (2018-11-24 21:44:50 PST)
Jan  1 00:00:20 FIPS[1267]: *** shell: FIPS Mode = disabled ***



User Access Verification
Username: [*01/01/1970 00:00:22.7400]
[*01/01/1970 00:00:22.7400]
[*01/01/1970 00:00:22.7400]
[*01/01/1970 00:00:22.7400]
[*01/01/1970 00:00:22.7400] Authenticating ACT2 ID:AP1560
[*01/01/1970 00:00:22.7400] Authenticating SN:FOC23415N8X
[*01/01/1970 00:00:22.7405]
[*01/01/1970 00:00:22.7405] (ACT2Boot) Hardware is Cisco (c) authentic :-)
[*01/01/1970 00:00:22.7405]
[*01/01/1970 00:00:22.7437] Seeding /dev/urandom from ACT2
[*01/01/1970 00:00:23.3843] Reading ACT2 SUDI certificates
[*10/18/2019 23:59:59.0066] Last reload time: Oct 20 13:27:40 2019
[*10/20/2019 13:27:40.0001] Setting system time Sun Oct 20 13:27:40 UTC 2019
[*10/20/2019 13:27:40.1150] Loading kernel crypto modules
[*10/20/2019 13:27:40.2396] GCM-128 POST passed
[*10/20/2019 13:27:40.2397] GCM-256 POST passed
[*10/20/2019 13:27:40.2930] 0
[*10/20/2019 13:27:40.4208] Active version: 8.5.140.0
[*10/20/2019 13:27:40.4220] Backup version: 0.0.0.0
[*10/20/2019 13:[10/20/2019 13:27:40.5800] PCI: enabling device 0000:00:02.0 (0140 -> 0143)
27:40.5808] devi[10/20/2019 13:27:40.6600] PCI: enabling device 0000:02:00.0 (0140 -> 0142)
ce wired0 entered promiscuous mode
[*10/20/2019 13:27:42.1122] 0;0;0;0;0;0;0;
[*10/20/2019 13:27:43.6492] Firmware download complete
[*10/20/2019 13:27:43.6501] FIPS enc aes-ccmp Verified
[*10/20/2019 13:27:43.6502] FIPS dec aes-ccmp [10/20/2019 13:27:43.7900] PCI: enabling device 0000:00:03.0 (0140 -> 0143)
Verified
[*10/2[10/20/2019 13:27:43.8800] PCI: enabling device 0000:03:00.0 (0140 -> 0142)
0/2019 13:27:43.6503] FIPS enc aes-ccmp-256 Verified
[*10/20/2019 13:27:43.6504] FIPS dec aes-ccmp-256 Verified
[*10/20/2019 13:27:43.6505] FIPS enc aes-gcmp Verified
[*10/20/2019 13:27:43.6506] FIPS dec aes-gcmp Verified
[*10/20/2019 13:27:43.6507] FIPS enc aes-gcmp-256 Verified
[*10/20/2019 13:27:43.6508] FIPS dec aes-gcmp-256 Verified
[*10/20/2019 13:27:45.3297] 0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;
[*10/20/2019 13:27:49.6059] Firmware download complete
[*10/20/2019 13:27:49.6066] FIPS enc aes-ccmp Verified
[*10/20/2019 13:27:49.6068] FIPS dec aes-ccmp Verified
[*10/20/2019 13:27:49.6069] FIPS enc aes-ccmp-256 Verified
[*10/20/2019 13:27:49.6070] FIPS dec aes-ccmp-256 Verified
[*10/20/2019 13:27:49.6071] FIPS enc aes-gcmp Verified
[*10/20/2019 13:27:49.6072] FIPS dec aes-gcmp Verified
[*10/20/2019 13:27:49.6073] FIPS enc aes-gcmp-256 Verified
[*10/20/2019 13:27:49.6074] FIPS dec aes-gcmp-256 Verified
[*10/20/2019 13:27:50.0877] ifconfig: SIOCGIFFLAGS: No such device
[*10/20/2019 13:27:50.2085] Initializing NSS Firmware
[10/20/2019 13:27:53.3500] Disabling lock debugging due to kernel taint
[*10/20/2019 13:27:53.4576] stile module dp init successfully
[*10/20/2019 13:27:53.4577] NBAR Label:BLD_V155_3_S_XE316_THROTTLE_LATEST_20180404_162221 NBAR VERSION:module build date: Nov 24 2018 at 22:03:12
[*10/20/2019 13:27:54.9723] Loading nf_conntrack...
[*10/20/2019 13:27:54.9907] Loading nf_conntrack_ftp...
[*10/20/2019 13:27:55.0021] Loading nf_defrag_ipv4...
[*10/20/2019 13:27:55.0136] Loading nf_defrag_ipv6...
[*10/20/2019 13:27:55.0251] Loading nf_conntrack_ipv4...
[*10/20/2019 13:27:55.0366] Loading nf_conntrack_ipv6...
[*10/20/2019 13:27:55.0480] Loading nf_conntrack_irc...
[*10/20/2019 13:27:55.0597] Loading nfnetlink...
[*10/20/2019 13:27:55.0712] Loading nf_conntrack_netlink...
[*10/20/2019 13:27:55.0830] Loading nf_conntrack_sip...
[*10/20/2019 13:27:55.0947] Loading nf_nat...
[*10/20/2019 13:27:55.1063] Loading nf_nat_ftp...
[*10/20/2019 13:27:55.1176] Loading nf_nat_ipv4...
[*10/20/2019 13:27:55.1293] Loading nf_nat_irc...
[*10/20/2019 13:27:55.1406] Loading nf_nat_sip...
[*10/20/2019 13:27:55.1521] Loading x_tables...
[*10/20/2019 13:27:55.1641] Loading xt_conntrack...
[*10/20/2019 13:27:55.1755] Loading xt_state...
[*10/20/2019 13:27:55.1870] Loading xt_nat...
[*10/20/2019 13:27:55.1983] Loading xt_tcpudp...
[*10/20/2019 13:27:55.2100] Loading ip_tables...
[*10/20/2019 13:27:55.2219] Loading iptable_filter...
[*10/20/2019 13:27:55.2334] Loading iptable_mangle...
[*10/20/2019 13:27:55.2448] Loading iptable_nat...
[*10/20/2019 13:27:55.2563] Loading ip6_tables...
[*10/20/2019 13:27:55.2679] Loading ip6t_REJECT...
[*10/20/2019 13:27:55.2797] Loading ip6t_ipv6header...
[*10/20/2019 13:27:55.2913] Loading ip6table_filter...
[*10/20/2019 13:27:55.3029] Loading ip6table_mangle...
[*10/20/2019 13:27:55.3147] Loading ipt_MASQUERADE...
[*10/20/2019 13:27:55.3262] Loading ipt_REJECT...
[*10/20/2019 13:27:55.3378] Loading iptable_raw...
[*10/20/2019 13:27:55.3496] Loading ip6table_raw...
[*10/20/2019 13:27:55.3611] Loading bridge...
[*10/20/2019 13:27:55.3767] Loading nfnetlink_log...
[*10/20/2019 13:27:55.3884] Loading xt_mark...
[*10/20/2019 13:27:55.4002] Loading xt_policy...
[*10/20/2019 13:27:55.4118] xt_tcpudp is already loaded
[*10/20/2019 13:27:55.4118] Loading ebtables...
[*10/20/2019 13:27:55.4241] Loading ebt_ip...
[*10/20/2019 13:27:55.4358] Loading ebt_ip6...
[*10/[10/20/2019 13:27:57.2000] wired0 emac 1: link up
20/2019 13:27:55[10/20/2019 13:27:57.2700] wired0: link up
.4474] Loading ipt_ULOG...
[*10/20/2019 13:27:55.6031]
[*10/20/2019 13:27:55.6069] boot 59 build T-b1c4d316cf409bad6ec9cbf2958c6014776e95f2-gb1c4d316-vipendya board barbados mac 7C:21:0E:72:F2:DC
[*10/20/2019 13:27:55.6102] Module: act2_driver  .text=0x7f000000        data=0x7f000770        bss=0x7f000a04
[*10/20/2019 13:27:55.6102] Module: aes_generic  .text=0x7f004000        data=0x7f00a460        bss=
[*10/20/2019 13:27:55.6102] Module: sha256_generic  .text=0x7f00e000        data=0x7f00fbdc        bss=
[*10/20/2019 13:27:55.6102] Module: sha512_generic  .text=0x7f014000        data=0x7f0158c8        bss=
[*10/20/2019 13:27:55.6102] Module: hmac  .text=0x7f019000        data=0x7f0195e8        bss=
[*10/20/2019 13:27:55.6103] Module: sha1_generic  .text=0x7f01d000        data=0x7f01d2cc        bss=
[*10/20/2019 13:27:55.6103] Module: sha1_arm  .text=0x7f021000        data=0x7f021850        bss=
[*10/20/2019 13:27:55.6103] Module: gf128mul  .text=0x7f025000        data=        bss=
[*10/20/2019 13:27:55.6103] Module: cbc  .text=0x7f02a000        data=0x7f02a4f4        bss=
[*10/20/2019 13:27:55.6103] Module: ctr  .text=0x7f02e000        data=0x7f02e7c8        bss=
[*10/20/2019 13:27:55.6103] Module: ghash_generic  .text=0x7f032000        data=0x7f032268        bss=
[*10/20/2019 13:27:55.6103] Module: seqiv  .text=0x7f036000        data=0x7f036654        bss=
[*10/20/2019 13:27:55.6103] Module: mbedtls  .text=0x7f03a000        data=0x7f0415e0        bss=0x7f041850
[*10/20/2019 13:27:55.6103] Module: aptrace  .text=0x7f046000        data=0x7f051f84        bss=0x7f052470
[*10/20/2019 13:27:55.6103] Module: ap8x  .text=0x7f05a000        data=0x7f10c69c        bss=0x7f1140b8
[*10/20/2019 13:27:55.6103] Module: mv_nss_api  .text=0x7f304000        data=0x7f356680        bss=0x7f357b08
[*10/20/2019 13:27:55.6103] Module: proclikefs  .text=0x7f369000        data=        bss=0x7f369b80
[*10/20/2019 13:27:55.6103] Module: stile_lm_ft  .text=        data=        bss=
[*10/20/2019 13:27:55.6103] Module: stile_lm_dp  .text=        data=        bss=
[*10/20/2019 13:27:55.6103] Module: mtdoops  .text=0x7fe8a000        data=0x7fe8ae34        bss=0x7fe8afa8
[*10/20/2019 13:27:55.6103] Module: ipv6  .text=0x7fe8f000        data=0x7fec4ac0        bss=0x7fec6680
[*10/20/2019 13:27:55.6103] Module: llc  .text=0x7feed000        data=0x7feed854        bss=0x7feed9f0
[*10/20/2019 13:27:55.6103] Module: stp  .text=0x7fef2000        data=0x7fef2280        bss=0x7fef243c
[*10/20/2019 13:27:55.6103] Module: nf_conntrack  .text=0x7fef6000        data=0x7feffb40        bss=0x7ff0084c
[*10/20/2019 13:27:55.6104] Module: nf_conntrack_ftp  .text=0x7ff10000        data=        bss=0x7ff11380
[*10/20/2019 13:27:55.6104] Module: nf_defrag_ipv4  .text=0x7ff15000        data=0x7ff15188        bss=
[*10/20/2019 13:27:55.6104] Module: nf_defrag_ipv6  .text=0x7ff19000        data=0x7ff1a05c        bss=0x7ff1a2c0
[*10/20/2019 13:27:55.6104] Module: nf_conntrack_ipv4  .text=0x7ff20000        data=0x7ff21d88        bss=0x7ff22218
[*10/20/2019 13:27:55.6104] Module: nf_conntrack_ipv6  .text=0x7ff28000        data=0x7ff291bc        bss=
[*10/20/2019 13:27:55.6104] Module: nf_conntrack_irc  .text=0x7ff2e000        data=0x7ff2e57c        bss=0x7ff2ea24
[*10/20/2019 13:27:55.6104] Module: nfnetlink  .text=0x7ff32000        data=0x7ff32a34        bss=0x7ff32bac
[*10/20/2019 13:27:55.6104] Module: nf_conntrack_netlink  .text=0x7ff37000        data=0x7ff3aa5c        bss=
[*10/20/2019 13:27:55.6104] Module: nf_conntrack_sip  .text=0x7ff40000        data=        bss=0x7ff43f44
[*10/20/2019 13:27:55.6104] Module: nf_nat  .text=0x7ff49000        data=0x7ff4af6c        bss=0x7ff4b18c
[*10/20/2019 13:27:55.6104] Module: nf_nat_ftp  .text=0x7ff51000        data=0x7ff51320        bss=
[*10/20/2019 13:27:55.6104] Module: nf_nat_ipv4  .text=0x7ff55000        data=        bss=0x7ff5591c
[*10/20/2019 13:27:55.6104] Module: nf_nat_irc  .text=0x7ff59000        data=0x7ff59254        bss=
[*10/20/2019 13:27:55.6104] Module: nf_nat_sip  .text=0x7ff5d000        data=0x7ff5e7d8        bss=
[*10/20/2019 13:27:55.6104] Module: x_tables  .text=0x7ff62000        data=0x7ff64184        bss=0x7ff642fc
[*10/20/2019 13:27:55.6104] Module: xt_conntrack  .text=0x7ff6b000        data=        bss=
[*10/20/2019 13:27:55.6104] Module: xt_state  .text=0x7ff6f000        data=        bss=
[*10/20/2019 13:27:55.6104] Module: xt_nat  .text=0x7ff73000        data=        bss=
[*10/20/2019 13:27:55.6105] Module: xt_tcpudp  .text=0x7ff77000        data=        bss=
[*10/20/2019 13:27:55.6105] Module: ip_tables  .text=0x7ff7b000        data=0x7ff7ceb4        bss=0x7ff7d12c
[*10/20/2019 13:27:55.6105] Module: iptable_filter  .text=0x7ff81000        data=0x7ff811b0        bss=
[*10/20/2019 13:27:55.6105] Module: iptable_mangle  .text=0x7ff85000        data=0x7ff85210        bss=
[*10/20/2019 13:27:55.6105] Module: iptable_nat  .text=0x7ff89000        data=0x7ff895bc        bss=
[*10/20/2019 13:27:55.6105] Module: ip6_tables  .text=0x7ff8d000        data=0x7ff8ef50        bss=0x7ff8f1c8
[*10/20/2019 13:27:55.6105] Module: ip6t_REJECT  .text=0x7ff93000        data=        bss=
[*10/20/2019 13:27:55.6105] Module: ip6t_ipv6header  .text=0x7ff97000        data=        bss=
[*10/20/2019 13:27:55.6105] Module: ip6table_filter  .text=0x7ff9b000        data=0x7ff9b174        bss=
[*10/20/2019 13:27:55.6105] Module: ip6table_mangle  .text=0x7ff9f000        data=0x7f[10/20/2019 13:28:03.0700] wired0 emac 1: link up
f9f284        bs[10/20/2019 13:28:03.1300] wired0: link up
s=
[*10/20/2019 13:27:55.6105] Module: ipt_MASQUERADE  .text=0x7ffa3000        data=0x7ffa32a8        bss=
[*10/20/2019 13:27:55.6105] Module: ipt_REJECT  .text=0x7ffa7000        data=        bss=
[*10/20/2019 13:27:55.6105] Module: iptable_raw  .text=0x7ffab000        data=0x7ffab17c        bss=
[*10/20/2019 13:27:55.6105] Module: ip6table_raw  .text=0x7ffaf000        data=0x7ffaf140        bss=
[*10/20/2019 13:27:55.6106] Module: bridge  .text=0x7ffb3000        data=0x7ffc0074        bss=0x7ffc05c8
[*10/20/2019 13:27:55.6106] Module: nfnetlink_log  .text=0x7ffcf000        data=0x7ffd05f0        bss=0x7ffd07fc
[*10/20/2019 13:27:55.6106] Module: xt_mark  .text=0x7ffd6000        data=        bss=
[*10/20/2019 13:27:55.6106] Module: xt_policy  .text=0x7ffda000        data=        bss=
[*10/20/2019 13:27:55.6106] Module: ebtables  .text=0x7ffde000        data=0x7ffe15ec        bss=
[*10/20/2019 13:27:55.6106] Module: ebt_ip  .text=0x7ffe5000        data=        bss=
[*10/20/2019 13:27:55.6106] Module: ebt_ip6  .text=0x7ffe9000        data=        bss=
[*10/20/2019 13:27:55.6106] Module: ipt_ULOG  .text=0x7ffed000        data=0x7ffed8a0        bss=
[*10/20/2019 13:27:55.6106] Module: crc_itu_t  .text=0x7fff1000        data=        bss=
[*10/20/2019 13:27:55.6107] Module: lowmemorykiller  .text=0x7fff5000        data=0x7fff52f4        bss=0x7fff54a0
[*10/20/2019 13:27:55.6107] Module: p8022  .text=0x7fff9000        data=        bss=
[*10/20/2019 13:27:55.6107] Module: psnap  .text=0x7fffd000        data=0x7fffd344        bss=0x7fffd4c4
[*10/20/2019 13:27:55.6107] Module: rng_core  .text=0x7f00c000        data=0x7f00c818        bss=0x7f00c9d8
[*10/20/2019 13:27:55.6107] Module: udf  .text=0x7f2e6000        data=0x7f2f6044        bss=0x7f2f61c0
[*10/20/2019 13:27:55.6369]
[*10/20/2019 13:27:55.6369]  led pattern module start
[*10/20/2019 13:27:55.6635] milos /tmp/SC4_1dbm.txt
[*10/20/2019 13:27:55.7768] Last reload reason : 0: unknown
[*10/20/2019 13:28:02.5692] click-config/io-real.click:131: While configuring 'todev_wired0 :: ToDevice':
[*10/20/2019 13:28:02.5693]   warning: device 'wired0' is down
[*10/20/2019 13:28:02.5914] click-config/io-real.click:131: While configuring 'fromdev_wired0 :: FromDevice':
[*10/20/2019 13:28:02.5914]   warning: device 'wired0' is down
[*10/20/2019 13:28:03.0506] click-config/io-real.click:131: While initializing 'tohost_wired0 :: ToHost':
[*10/20/2019 13:28:03.0506]   warning: device 'wired0' is down
[*10/20/2019 13:28:03.2063] aptrace_register_sysproc_fn: duplicate registeration for 'wired'
[*10/20/2019 13:28:03.3488]
[*10/20/2019 13:28:03.3488] Click sched monitor: schedulers = 1
[*10/20/2019 13:28:04.0239] chatter: tohost_srcr6 :: ToHost: device 'srcr6' went down
[*10/20/2019 13:28:04.0332] chatter: tohost_srcr6 :: ToHost: device 'srcr6' came up
[*10/20/2019 13:28:04.0337] ip6_port srcr6, ip6local fe80::7e21:eff:fe72:f2dc, ip6 ::, plen 0, gw6 ::, gw6_mac 00:00:00:00:00:00, mtu 1500, vid 0, mode6 3(slaac)
[*10/20/2019 13:28:04.2820] SYS-COND: AP is in fair condition

Username: [*10/20/2019 13:28:18.3061]  Create symlink /dev/mic_cert result 0
[*10/20/2019 13:28:18.3061] Loading certificates from storage...
[*10/20/2019 13:28:18.3201] SKU to radio FW
[*10/20/2019 13:28:18.6186] Generating key, this may take a while...
[*10/20/2019 13:28:19.5644] Public key portion is:
[*10/20/2019 13:28:19.5644] ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCkblWctT5tPJgxrU4yHyZN77kPJbiMgTBcxUgENAll3aYB0zm1g4z7C00g35VL4GolZNiof9SW7Yy74TxITOS1YNlNnhKjtBzE3ebnMR071t4RKD2uL13OLgtDM+i/6nhp12KJIsfpmIMPvQjeLdAGUGiu9rVmMmfs5iooGYuXTtnvalErimdSMGFoqOyZ8w9z9tGf8iqEvLFDxTcFEeoJX2FtjOJe1mDxphVhgjP7qSUIBnaRfRejXZ5dVKUoB8F/T5/XkxUA2m8usWris1+8slu85i0bKoAAJZSykEwT863tR2JEfkqR7upcPH2l7m7t5Qbtk4iMVo3kD+wN7Y0D root@m7C210E72F2DC
[*10/20/2019 13:28:19.5644] Fingerprint: sha1!! 62:64:63:84:ea:3b:dd:d2:89:c1:7c:9f:e1:65:a7:66:c1:b8:67:dd
[*10/20/2019 13:28:19.5759] Starting monit
[*10/20/2019 13:28:19.8413]  New Monit id: 9f4e18df1ba50150ce69c485539eaa4c
[*10/20/2019 13:28:19.8413]  Stored in '/var/.monit.id'
[*10/20/2019 13:28:19.8415] Starting Monit 5.18 daemon with http interface at [*]:2812
[*10/20/2019 13:28:22.7044] starting tam services using ACT2...
[*10/20/2019 13:28:23.1606] Password for user changed
[*10/20/2019 13:28:23.4671] gzip -dc /etc/wcp.usermodule.template.gz | sed -e 's/__TX_POWER_XOR_5G_FILE__/\/radio_fw\/X5.csv/g' -e 's/__EVM_POWER_XOR_5G_FILE__/\/radio_fw\/EVM_X5.csv/g' -e 's/__TX_POWER_2G_FILE__/\/radio_fw\/R2.csv/g' -e 's/__TX_POWER_5G_FILE__/\/radio_fw\/R5.csv/g' -e 's/__EVM_POWER_2G_FILE__/\/radio_fw\/EVM_2.csv/g' -e 's/__EVM_POWER_5G_FILE__/\/radio_fw\/EVM_5.csv/g' -e 's/__DOMAIN_2G__/0/g' -e 's/__DOMAIN_5G__/41/g' -e 's/__PWR_TABLE_49G__/0/g' -e 's/__PRODUCT_ID__/AIR-AP1562E-B-K9/g' -e 's/__AP_TYPE__/67/g' -e 's/__WIRELESS_MAC__/6C:31:0E:3C:EB:E0/g' -e 's/__WIRED_MAC__/7C:21:0E:72:F2:DC/g' -e 's/__WIRED1_MAC__/7C:21:0E:72:F2:DC/g' | DMALLOC_OPTIONS=debug=0x400003,inter=1000,log=/tmp/wcp.dmalloc.log,limit=40000000 wcpd &
[*10/20/2019 13:28:26.0890] CRIT-MeshControl:
[*10/20/2019 13:28:26.0891] Mesh Control: skipped adding wired1 backhaul

HunterMathews2967 · ‎12-11-2019

Got it to join.

Was missing:

AP IP address, since network doesn't have DHCP
capwap ap primary-base WLC-1 X.X.X.X

Scott Fella · ‎12-11-2019

That is the most basic requirement for any lwapp and capwap ap. You should of seen this error on the console of the ap.

-Scott
*** Please rate helpful posts ***

HunterMathews2967 · ‎12-11-2019

I did :

Waiting for uplink IPv4 configuration

Was just hoping that there would be a way to configure the IP from the WLC without using DHCP. Never had set up a WLC before and was hoping setting up APs could be more closer to plug-n-play with configuration solely in the WLC.

Scott Fella · ‎12-11-2019

Previous hardware and older code allowed you to setup DHCP. However, that is no longer the case as DHCP is removed. I would enable DHCP while you stage and then turn it off. It’s easier to be honest. I also use to run a DHCP service on my laptop when I had to stage of there was no DHCP available. Something to think about.

-Scott
*** Please rate helpful posts ***