WLC 5500 version 8.2.151.0 ERROR MODULE AP 802

[fperalta11]

Buenas Tardes, estoy teniendo una dificultad con un router modelo  C881W-A-K9 IOS flash:c800-universalk9-mz.SPA.154-3.M7.bin, modulo AP 802 ios ap802-k9w8-mx.153-3.JC6 no se puede registrar en la controladora y al acceder al modulo ap service-module el modulo queda en modo rommon es como si fuese que el dispositivo no sabe por que ios bootear.OpenRommonACC2

Algun comentario seria de mucha ayuda Gracias.

[Daniel Ordóñez Flores]

Hola @fperalta11

1. Me parece que lo primero que debes de realizar es la recuperación de la imagen del AP.

Lo puedes hacer a traves del siguiente Link.

2. La guía completa del router y el modulo del AP lo puedes encontrar aquí.

Espero que la información te sea de utilidad.

***Please rate the answer if this information was useful***

**Por favor si la información fue util marca esta respuesta como correcta**

*Tu reconocimiento nos alienta a seguir participando en los foros *

[fperalta11]

Si en esto caso ya lo había hecho 2 veces los mismos paso de poder cargar el ios lightweight con la version correspondiente del WLC nuevamente.
8.2.151.0 15.3(3)JC6 Lightweight APs: 1040, 1140, 1260, 1600, 1700, 1810 OEAP, 1810W, 1830, 1850, 2600, 2700,
2800, 3500e, 3500i, 3500p, 3600e, 3600i, 3600p, 3702e, 3702i, 3702p, 3800, 600 OEAP, 700,
700W, AP802, AP803, ASA5506W-AP702

Pero cuando quiero acceder al equipo veo que no tengo administracion como si fuese que se salio del registro del wlc. Y queda en modo rommon la unica forma de poder registrar y poder acceder al equipo es reiniciando el router.

[patoberli]

Hola fperalta
I think I understand your question, but my Spanish is not good enough to answer with.
You need to download a lightweight image for your AP from the Cisco support site.
Here you find an installation manual: https://supportforums.cisco.com/t5/wireless-mobility-documents/access-point-rommon-recovery-ap-prompt-recovery-example/tac-p/3119498/highlight/true#M758
Please note, the manual is for a different access point model, but the commands are the same. Just change the filename to the one you have downloaded.
The AP can't register to the WLC without a lightweight image installed. Rommon means it's either broken or has no image installed.

[fperalta11]

Good morning,
I fully understand the steps to follow for IOS recovery. My question is the following as I would be doing with the button mode I feel that the ap 802 is intergrando in the router 881?
I know that the models ap 2600 have the reset button in that case if it works correctly.

Greetings.

[patoberli]

Oh I didn't see that detail, sorry. I've never worked with those routers, but I think you can do it.
Have a look here: https://www.cisco.com/c/en/us/support/docs/wireless/ap802-integrated-access-point/200047-AP802-Image-Recovery.html
You have to load the configuration in the Router environment.

As you are already in ROMMON, there is no need to reset it. It doesn't have a configuration loaded there.