02-01-2021 02:39 AM - edited 07-05-2021 01:08 PM
Hi all,
I got a central wlc5508 and all my Access points (AIR-LAP1142N-E-K9) are connected via flex connect.
When i go to Wireless -> All AP's -> click on one AP -> FlexConnect -> VLAN Mappings, there are 5 Wlan Vlan Mappings and two centrally switched vlans.
I would like to convert those two centrally switched wlans to flex connect vlans.
Can you please tell me how to do that?
Thank you in advance!
Solved! Go to Solution.
02-01-2021 03:20 AM
Navigate to WLAN Tab -> Click WLAN ID -> Advanced -> Scroll down and look for FlexConnect section -> Enable 'FlexConnect Local Switching' - Click Apply
This will modify your WLAN from central switch to local switching.
Let me know if this helps!
02-01-2021 03:20 AM
Navigate to WLAN Tab -> Click WLAN ID -> Advanced -> Scroll down and look for FlexConnect section -> Enable 'FlexConnect Local Switching' - Click Apply
This will modify your WLAN from central switch to local switching.
Let me know if this helps!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide