07-16-2020 05:00 AM - edited 07-05-2021 12:17 PM
Hi ..
configured CIMC Port on WLC 5520.
set admin password on cli
(WLC5520) >imm username admin password test123 test123
(WLC5520) >imm summary
This will take some time...
Please be patient!
User ID.......................................... admin
DHCP............................................. Disabled
IP Address....................................... 10.10.10.10
Subnet Mask...................................... 255.255.255.0
Gateway.......................................... 10.10.10.1
But can not log in with admin and the set password.
Login failed. Verify that your username and password are correct. |
When doing imm restart with "imm restart" - will the whole WLC reboot, or just the CIMC module?
* * *
(WLC5520) >show imm chassis bios
BIOS Information
Vendor: Cisco Systems, Inc.
Version: C220M4.2.0.13d.0.0812161113
Release Date: 08/12/2016
WLC Firmware is 8.3.143.0
07-16-2020 05:57 AM
07-17-2020 06:21 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide