04-30-2021 04:43 AM - edited 07-05-2021 01:15 PM
Hello,
I'm currently upgrading our WLC 5520 from 8.2.130.0 to 8.2.170.0, predownloading on AP 3802, I can see this status :
AP4 is still in Predownloading status while it seems the backup image is updated with correct version.
The "complete" APs show version "167.43.3.47" instead of "8.2.170.0", do you have an idea why it's showing this version ?
Solved! Go to Solution.
04-30-2021 06:25 AM
@Clem58 wrote:
I cannot reset the AP via config AP reset ? We need to shutdown it via power down ?
The AP will not accept any commands coming from the controller.
The only way is to power reboot the AP, by turning off/on PoE, or by rebooting the controller.
04-30-2021 05:48 AM
This is a known bug.
Either manually reboot the AP (by killing the power) or reboot the controller using the "system reset forced" command.
04-30-2021 05:50 AM
04-30-2021 06:25 AM
@Clem58 wrote:
I cannot reset the AP via config AP reset ? We need to shutdown it via power down ?
The AP will not accept any commands coming from the controller.
The only way is to power reboot the AP, by turning off/on PoE, or by rebooting the controller.
04-30-2021 06:29 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide