WLC 8.0.115.0 can't find 'AP Group VLAN'

[roussseau]

May be I'm missing something obvious but I couldn't find 'AP group vlan' in 5508 WLC (ver: 8.0.115.0). I would like to setup a SSID for large number of users where I want to use multiple VLAN for the same SSID. Various document says it's done with 'AP Group VLAN' but I dont see it, is it called something else in new version?

[Sandeep Choudhary · Accepted solution]

Hi Rousss,

You want to create a single SSID for all but want to assign different vlan to this ?

if i understand it correctly then you want to create Interface groups!

Go to  Controller > Interface Groups , Click Add Group, enter interface group anme and description and then add the interface to this group.

After creating Interface group go to WLAN section and assign Interface group to this SSID.

Regards

Don't forget to rate helpful posts

[roussseau]

Thank you. That's exactly what I want to do. I think the term 'AP Group VLAN' is no longer used in recent versions.