WLC 9800-L-F models are Does it not support 1G SFP module?

[CCC3]

WLC 9800-L-F models are
Does it not support 1G SFP module?

The port says 10G.

I wonder if 1G SFP is not supported.

If there are any related documents, please let me know

[haorzhao]

Hi ,

Please refer to below DOC.

https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/datasheet-c78-742434.html

*SFPs supported

[CCC3]

I know it supports SFP, but

Where does it say that 1G out of 1G / 10G is possible?

[haorzhao]

please refer the doc ,

there is a list of  SFP supported on the C9800-L-F-K9 Model. 

All the SFP in list is supported ,otherwise it is not supported .

[Scott Fella]

Take a look at the guide:
2x 10G/Multigigabit copper (Figure 4) 2x 10G/Multigigabit fiber (Figure 5)

As you can see it is a 10G port. You need to just use 9-12 that support 1G.

https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/datasheet-c78-742434.html#Platformdetails

[marce1000 · Accepted solution]

 - FYI : https://tmgmatrix.cisco.com/?npid=2562

 M.