cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1037
Views
3
Helpful
5
Replies

WLC 9800-L-F models are Does it not support 1G SFP module?

CCC3
Level 1
Level 1

WLC 9800-L-F models are
Does it not support 1G SFP module?

The port says 10G.

I wonder if 1G SFP is not supported.

If there are any related documents, please let me know

1 Accepted Solution

Accepted Solutions

marce1000
VIP
VIP

 

 - FYI : https://tmgmatrix.cisco.com/?npid=2562

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

5 Replies 5

I know it supports SFP, but

Where does it say that 1G out of 1G / 10G is possible?

haorzhao
Cisco Employee
Cisco Employee

please refer the doc ,

there is a list of  SFP supported on the C9800-L-F-K9 Model. 

All the SFP in list is supported ,otherwise it is not supported .

Take a look at the guide:
2x 10G/Multigigabit copper (Figure 4) 2x 10G/Multigigabit fiber (Figure 5)

As you can see it is a 10G port. You need to just use 9-12 that support 1G.

https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/datasheet-c78-742434.html#Platformdetails

ScottFella_0-1681098494675.png

-Scott
*** Please rate helpful posts ***

marce1000
VIP
VIP

 

 - FYI : https://tmgmatrix.cisco.com/?npid=2562

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Review Cisco Networking for a $25 gift card