WLC ap_count license issue

[zwjames056]

Dear Support,

I'd two WLCs (for Serial Number FCH2037V357 & FCH2035V4GU), and take total 94 ap_count license in the same case.

But now I find that, the license were shared with two WLCs automatically, then the ap_count are 97 on my WLC (by 50 default and 94/2=47 ap_count license). It's not meets requirements with my Architecture, now I want take 10 ap_count licenses from a WLC (serial number : FCH2037V357) to the other (serial number : FCH2035V4GU), for 87 ap_count with FCH2037V357 and 107 ap_count with FCH2035V4GU, what can I do for that?

Best Regards,

Adonis

[sandjose_cisco · Accepted solution]

If it is 8540/5520/7500/8500 you can move the license by yourself since it is RTU based

If you are using 5500 then it is honor based , contact  Cisco TAC to have the license moved

[Prabath Godevithanage · Accepted solution]

Hi Adonis,

You have some private information posted here and I don't think anyone here wants to see that.I suggest you may black out the private stuff.

See here . 5520 carry RTU licenses if you have purchase enough for your project.you can move them around in any combination as long as it doesn't exceed total amount

Cheers

Prabath

**Please rate all the useful answers**

[zwjames056]

Hi Sir,

It's work, my WLC type is 5520, and I trun the license type to RTU, now I move the ap_count to the other WLC successful. thanks a lot.

Adonis