02-24-2009 02:03 AM - edited 07-03-2021 05:13 PM
Hi,
I've 2 WLC managed by WCS that every night saves the configurations of both the WLCs, recently I replaced one of the two WLC with a new one (RMA Replacement)and I've uploaded the saved configuration via GUI using a TFTP server to the new WLC.The problem is that the uploaded configuration has lost all the configured security parameters(WPA, Radius servers etc.)so I had to configure them again manually.
The version of the WLCs is the 5.2 and the configuration of the WCS is the 5.2 too.
Thanks in advance.
Fabio
02-24-2009 04:08 AM
What was the version of code on the newly replace controller before you pushed the image to it?
02-24-2009 05:43 AM
The steps that I've performed are the following:
* update of the new WLC to the 5.2 version (same of the primary WLC)
* download to the controller of the previously saved configuration
* All the parameters are ok but the security, in fact I've lost the Radius servers, WPA keys and all the SSID's are in broadcast.
So i had to fix all the missing parameters manually.
Thanks
Fabio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide